Baer EradiSpeed +1 Rear Installation Instructions Manual
    |
BAER Your Complete Performance Brake Supplier!Baer Brakes, Inc. 2222 W. Peoria Ave. Phoenix, Arizona 85029Ph. (602) 233-1411 Fax. (602) 352-8445 Email. Brakes@baer.com www.baer.comPage 1 of 4Installation InstructionsProduct: EradiSpeed +1 Rear Instruction Part Number: 6000017Vehicle Revision Date: 23 December 2013Make: GMModel: Pickup / SUVYear(s): 99-04 Pickup / 99+ SUVNotices – Read and Follow BEFORE ATTEMPTING INSTALLATION All installations require proper safety procedures and protective eyewear. All installations assume basic mechanical skill and a factory service manual for the vehicle onwhich the installation is to be performed. All references to the “left” side of the vehicle correlate to the driver’s side of the vehicle. Any installation requiring you to remove a wheel or gain access under the vehicle requires use ofjack stands appropriate to the weight of the vehicle. In all cases, jack stands rated for a minimumof 2-tons is recommended. A selection of hand tools sufficient to engage in the installation of these products is assumed, andis the responsibility of the installer to have in his/her possession prior to beginning thisinstallation. All installations, which require removal of hydraulic hoses and/or bleeding of thebrakes, require appropriate fitting/line wrenches, safety catch can, and protective eyewear. Otherthan these items, if unique or special tools are required they will be stated appropriately in theinstallation step. ALWAYS CONFIRM WHEEL FIT PRIOR TO BEGINNING INSTALLATION OF ANY BRAKESYSTEM OR “UPSIZED” ROTOR UPGRADE! In addition to checking wheel fitment (availableonline at www.baer.com), always place the actual corner assembly or a combination of the caliperassembly onto the rotor, and into the actual wheel. This procedure will reconfirm proper clearancebetween the caliper and the wheel before proceeding with the actual installation. Returns will not be accepted for systems that have been partially or completely installed. Useextreme care when checking wheel fitment to prevent any cosmetic damage.ATTENTION: Read this before going any farther! Returns will not beaccepted for ANY installed PART or ASSEMBLY. Use great care toprevent cosmetic damage when performing wheel fit check. In the eventthat a product must be returned, please contact Baer Customer Servicefor a RMA Number. |
Related manuals for Baer EradiSpeed +1 Rear
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine