11OPERATOR’S MANUALBV-6I6” INDUSTRIAL BENCH VISE WITH PIPE JAWSINTRODUCTIONThe quality and reliability of the components assembled on a Baileigh Industrial machine guarantee near perfectfunctioning, free from problems, even under the most demanding working conditions. However, if a situation arises,refer to the manual first. If a solution cannot be found, contact the distributor where you purchased our product.Make sure you have the serial number and production year of the machine (stamped on the nameplate). Forreplacement parts refer to the assembly numbers on the parts list drawings.Our technical staff will do their best to help you get your machine back in working order.In this manual you will find: (when applicable)• Safety procedures• Correct installation guidelines• Description of the functional parts of the machine• Capacity charts• Set-up and start-up instructions• Machine operation• Scheduled maintenance• Parts listsGENERAL NOTESAfter receiving your equipment remove the protective container. Do a complete visual inspection, and if damage isnoted, photograph it for insurance claims and contact your carrier at once, requesting inspection. Also contactBaileigh Industrial and inform them of the unexpected occurrence. Temporarily suspend installation.Take necessary precautions while loading / unloading or moving the machine to avoid any injuries.Your machine is designed and manufactured to work smoothly and efficiently. Following proper maintenanceinstructions will help ensure this. Try and use original spare parts, whenever possible, and most importantly; DONOT overload the machine or make any modifications.Rev. 04/2020© 2020 Baileigh Industrial Holdings LLCREPRODUCTION OF THIS MANUAL IN ANY FORM WITHOUT WRITTEN APPROVAL OF BAILEIGH INDUSTRIALHOLDINGS LLC IS PROHIBITED. Baileigh Industrial Holdings LLC, Inc. does not assume and hereby disclaims anyliability for any damage or loss caused by an omission or error in this Operator’s Manual, resulting from accident,negligence, or other occurrence.