Bakers Pride COC-E1 Replacement Instructions Manual

Also see for COC-E: Catalog Brochure Parts list Instruction sheet Installation and operating instructions

Bakers Pride COC-E1 Replacement Instructions Manual Manual pdf 1 page image

~Q:\1035 Latch Replacement (I)1992-12-02 Rev.OIX300, X300-E and COC-EDOOR LATCH & CATCH REPLACEMENT INSTRUCTIONSDo not start work without all the necessary components. This Latch & Catch installation requires the followingitems:1. The Installation kit, consisting of:a) 1 - Installation Instructions (3 pages)b) 1 - Drawing (1035 LATCH & CATCH)c) 1 - Door Latch Assembly (LH S3030A) or (RH S3098A) complete with:d) 1-3/8-16x 1" hex. Bolt Q2301Ae) 5 - 3/8" Flat Steel Washers Q3042Af) 2 - 3/8" Flat Brass Washers Qg) 1 - 3/8" Wavy Spring Washers Qh) 1 - 3/8-16 hex. shipping nut Q2306Ai) 1 - 5/16 x 2 1/2" Spring S3005AJ) 2 - extra 3/8" Flat Steel Washers Q3042AK) 1 - Door Catch (LH S3029A) or (RH S3097 A)I) 4- 1/4-28 Flat Head Screws Q2008A2. Recommended tools such as:m) 1 - 1/4" wide flat blade screw drivern) 1 - 3/8" Ratchet Drive0) 1 - 6" Extension Piecep) 1 - 9/16" hex. socketq) 1 - 7/16" hex. socketr) 1 - 9/16" wrenchs) 1 -7/16" wrencht) Some Hi-Temperature GreaseInstallation Procedure:1. Turn off electric power to the unit.2. Remove the access cover on the side, open the control panel and secure out of the way.3. Remove the micro-switch from its bracket and secure out of the way.4. Open the door, disengage and discard the latch spring, remove and discard the latch, the 3/8"hex. bolt and the old steel washers.5. From the new 3/8-16 bolt remove the hex. shipping nut, apply some grease on both sides ofthe latch and between the washers, then fasten it to the latch box and tighten firmly (see fig 1).1 of 4

/ 4

Related manuals for Bakers Pride COC-E