Super Deck Y Series Gas Deck OvensStandard Features•Y Series @ 120,000 BTUH per deck, natural or LP gas•300°-650° F (149°-343°C) thermostat•Top and bottom heat control dampers & micro-slides•Combination gas controls with valve, regulator & pilotsafety•Heavy-duty, slide-out flame diverters•8” (203mm) interior deck heights with 2” (50.80mm) thickFibrament hearth decks•All stainless steel exteriors•Aluminized steel interiors•Spring balanced, fully insulated doors•Side or rear gas connections•7 gauge legs•Fully insulated throughout•2 year limited parts and labor warrantyOptions & Accessories•Side-mounted controls•Steel decks•150°-550° F (65°-288°C) Bake thermostat•Set of 4 casters – two with locks•Stainless steel legs•Special height legs•Steam injection•Automatic oven starter•Draft flue for direct vent (not available on CE units)CertificationsSUPER DECK Y SERIES GAS DECK OVENSBakers Pride Food Service Equipment • 1307 N Watters Rd. Suite 180 • Allen, Texas 75013 • 800.431.2745 • Fax 914.576.0605www.bakerspride.comY-600 withoptional castersRevised 100813cpBakers Pride Super Deck Y-Series gas Deck Ovens aredesigned for high volume pizza and all-purposeoperations.Ovens may be stacked two high. Oven exteriors are allheavy-gauge, type 403 stainless steel and are fullyinsulated up to 5” (127mm) thick for cooler outertemperatures and consistent interior temperaturesInterior oven frame is constructed of ¼” (6mm) heavy-duty angle iron frame, completely welded to form asingle, unitized section. The oven body and lining arethen welded to the framework.Oven interiors are manufactured of high-heat resistant16 gauge aluminized steel. Doors are fully insulated,spring balanced with tubular steel handles and willremain open or closed until moved.All models feature independent, operator-controlledtop & bottom heat control dampers and micro-slides forperfectly balanced results.Combination gas control incorporates a manual gasvalve, pilot safety and pressure regulator. Easilyremovable, slide-out, heavy-duty flame divertersdistribute the burner flame uniformly in the burnerchamber. A ¾” (19mm) NPT gas connection is locatedon the left side and left rear of oven – operator/installermay choose.Heavy-duty, 7 gauge hot rolled steel legs are standardand finished with durable Bakertone.2 year limited parts and labor warranty standard.Model Y-600with optional casters