Baldor 602E-MT Instruction Manual
Also see for 602E-MT: Instruction manual
MN9141MN914Instruction Manual For Belt Grinder-Buffer Model 602E-MTSAFETY NOTICE: WARNING statements describe conditions that may lead to personnel injury includingpotentially fatal injuries if the machine is not properly used and warnings are not properlyfollowed.Caution statements describe conditions that may lead to equipment damage.WARNING: Do not operate this grinder-buffer until you are sure that you are completely familiar withthe safe operation of the grinder-buffer, all accessories and safety equipment. Improperuse can lead to severe injury. This manual defines proper use of this equipment.Before using this equipment for any other use, please seek expert advise if you do notunderstand any procedure or operation concerning this grinder-buffer or this manual.WARNING: Prevent electrical shock hazard and accidental machine operation. Always disconnectgrinder-buffer from the power source before servicing, changing accessories (such asbelt, wire wheel, tool rest, spark arrestor, etc.) or before performing maintenance.WARNING: Avoid accidental starting. Make sure switch is in “OFF” position before connecting topower source.WARNING: Be sure the system is properly grounded before applying power. Do not apply powerbefore you ensure that grounds are connected. Electrical shock can cause serious or fatalinjury. Follow the National Electrical Code (NEC) and local codes for the safe installationof this equipment.WARNING: Always use safety glasses with side shields (or full face shield) when operating grinder.Do not use ordinary eyeglasses. Also use face or dust mask if cutting operation is dusty.WARNING: Unsuitable accessories or attachments added to this machine can create hazards. Baldoraccessories are specifically designed to be used with this grinder-buffer. Useaccessories or attachments only in the proper intended manner. Accessories orattachments obtained from another source may cause hazards. Consult the manufacturerbefore use.WARNING: To prevent injury, avoid contact with the wire wheel or belt or disc. The abrasive belt whenrunning is an aggressive cutting tool. Extra care should be exercised when using coarse gritbelts because of their rapid cutting action. Severe burns or cuts may result from contact.WARNING: Keep guards in place and in working order. Guards are design to prevent injury. Neveroperate this equipment if a guard is damaged, missing or improperly installed.WARNING: Remove adjusting keys and wrenches from this product after use. Check to see that keysand adjusting wrenches are removed from grinder-buffer before turning it on. Projectilescan cause severe injury to yourself or others.WARNING: Keep work area clean and well lighted. Clutter and poor lighting invites accidents.WARNING: Don't use in dangerous environment. Don't use grinder-buffers in damp or wet locations,or expose them to rain. Electrical shock can cause serious or fatal injury. Follow theNational Electrical Code (NEC) and local codes for the safe installation of this equipment.WARNING: Do not wear loose clothing, neckties, rings, bracelets, or other jewelry to get caught inmoving parts. Nonslip footwear is recommended. Wear protective hair covering to containlong hair.WARNING: Secure work. Use clamps to secure the work piece when practical. It's safer than usingyour hand and it keeps hands away from wheel or belt.WARNING: Check for damaged parts. Before further use, a guard or other part that is damaged shouldbe carefully checked to assure that it will operate properly and perform its intendedfunction. Check for alignment of moving parts, binding of moving parts, breakage of parts,mounting, and any other conditions that may affect its operation. A guard or other partthat is damaged should be properly repaired or replaced. |
Related manuals for Baldor 602E-MT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine