A-GAGE MINI-ARRAY Features• Measuring light screen system forprofiling and inspection applications• Compact control module and sensors• Controller is programmable, usingDeviceNet configuration software andsupplied EDS files for:– 8 measurement (“Scan Analysis”)modes– 4 scanning methods– Beam blanking– Selectable continuous, gated or host-controlled scan initiation– Programmable hysteresis for high andlow limits• Two Discrete outputs• Separate Gate input allows externalcontrol of scan initiation, for example, bya presence sensor• Low cost, compared with similar systems• Working range up to 17 m (55'),depending on model• Wide field of view, easily alignedA-GAGE™ MINI-ARRAY® Instruction Manual(Control Modules MACNXDN-1 and MACPXDN-1 with DeviceNet™ Interface)Printed in USA P/N 59437 rev. AWARNING . . .Not To Be Used for Personnel ProtectionThese sensors do NOT include the self-checking redundantcircuitry necessary to allow their use in personnel safety applications. Asensor failure or malfunction can cause either an energized or de-energizedoutput condition. Consult your current Banner Safety Products catalog forsafety products which meet OSHA, ANSI and IEC standards for personnelprotection.!Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com