Banner DX80G9M2S-P7 Manual

Also see for SureCross Performance FlexPower DX80G2M2S-P7: Manual

Banner DX80G9M2S-P7 Manual Manual pdf 1 page image

The SureCross® wireless system is a radio frequency network with integrated I/O that canoperate in most environments and eliminate the need for wiring runs. Wireless networks areformed around a Gateway, which acts as the wireless network master device, and one ormore Nodes.• Wireless industrial I/O device with up to 12 sinking discrete inputs or outputs. Defaultconfiguration is set to 6 inputs and 6 outputs (without bit-packing)• Selectable transmit power levels of 250 mW or 1 Watt and license-free operation up to 4watt EIRP, with a high-gain antenna, in the U.S. and Canada for 900 MHz• Power options allow for +10 to 30V dc or solar for low power applications; this model isnot recommended for DX81 or DX81P6 battery-powered operations• DIP switches for user configuration• Modbus serial interface• Site Survey analyzes the network’s signal strength and reliability and displays the re-sults on the Gateway's LCD• Frequency Hopping Spread Spectrum (FHSS) technology and Time Division MultipleAccess (TDMA) control architecture ensure reliable data delivery within the unlicensedIndustrial, Scientific, and Medical (ISM) band• Transceivers provide bidirectional communication between the Gateway and Node, in-cluding fully acknowledged data transmission• Lost RF links are detected and relevant outputs set to user-defined conditionsFor additional information, the most recent version of all documentation, and a complete list of accessories, refer to Banner Engineering'swebsite, www.bannerengineering.com/surecross.Models Frequency Power I/ODX80G9M2S-P7 900 MHz ISMBand +10 to 30V dc or solar power (this model isnot recommended for DX81 or DX81P6 bat-tery-powered operation)Discrete I/O: Up to 12 sinking inputs or up to 12NMOS sinking outputs (for a total of 12 I/O)(Default configuration is 6 IN and 6 OUT, withoutbit-packing)DX80G2M2S-P7 2.4 GHz ISMBandDX80...C (IP20; NEMA 1) models are also available. To order this model with an IP20 housing, add a Cto the end of the model number: DX80G9M2S-P7C.WARNING: Not To Be Used for Personnel ProtectionNever use this device as a sensing device for personnel protection. Doing so could lead to seriousinjury or death. This device does NOT include the self-checking redundant circuitry necessary to allow itsuse in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.CAUTION: Never Operate 1 Watt Radios Without AntennasTo avoid damaging the radio circuitry, never power up SureCross Performance or SureCross MultiHop (1Watt) radios without an antenna.The SureCross® Performance Wireless NetworkSureCross Performance FlexPower GatewayP/N 155285_webRev. D3/14/2013