Sure Cross® DXM100-Sx Wireless ModbusSlaveInstruction ManualOriginal Instructions188231 Rev. F10 December 2021© Banner Engineering Corp. All rights reserved188231

Banner Sure Cross DXM100-S Series Instruction Manual

DXM100-Sx Overview

DXM Hardware Configuration Overview

ISM Radio

DIP Switch Settings for the MultiHop HE5 Board Module

Binding the ISM Radio of a DXM100-Sx Modbus Slave

I/O Base Board for the DXM100-S1 Model

I/O Board Jumpers

Applying Power to the DXM100-Sx Modbus Slave

Connecting a Battery to the DXM Slave

Working with Solar Power

Recommended Solar Configurations

Monitoring Solar Operation

Inputs and Outputs

NMOS Outputs

Modbus I/O Registers for the DXM100-S1x I/O Base Board

I/O Base Board for the DXM100-S2 Model

Setting the Modbus Slave ID on the I/O Base Board

Using Courtesy Power or Switch Power

Supplying Power from a Solar Panel

Connecting the Communication Pins

DC Latching Outputs

Modbus I/O Registers for the DXM100-S2x I/O Base Board

DXM Modbus Registers

Restoring Factory Default Settings

DXM100 Dimensions

Accessories

Additional Information

DXM Security

DXM100-S Series

DXM100-S1

DXM100-S2