Banner Sure Cross P16E Series Manual
DatasheetThe Sure Cross® wireless system is a radio frequency network with integrated I/O that operates in most environments to eliminatethe need for wiring runs.• Wireless industrial I/O device with two configurable asynchronous counter inputs andfour NMOS outputs• Selectable transmit power levels of 250 mW or 1 Watt for 900 MHz models and 65 mWfor 2.4 GHz models• DIP switches for user configuration• Frequency Hopping Spread Spectrum (FHSS) technology ensures reliable data deliverywithin the unlicensed Industrial, Scientific, and Medical (ISM) band• Transceivers provide bidirectional communication between the Gateway and Node,including fully acknowledged data transmission• Lost RF links are detected and relevant outputs set to user-defined conditions• Field-wireable terminals for wiring I/OImportant: Please download the complete Performance Gateway or Node technical documentation, available inmultiple languages, from www.bannerengineering.com for details on the proper use, applications, Warnings,and installation instructions of this device.Important: Por favor descargue desde www.bannerengineering.com toda la documentación técnica de losPerformance Gateway or Node, disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones,advertencias, y las instrucciones de instalación de estos dispositivos.Important: Veuillez télécharger la documentation technique complète des Performance Gateway or Node surnotre site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les notesde sécurité et les instructions de montage.WARNING:• Do not use this device for personnel protection• Using this device for personnel protection could result in serious injury or death.• This device does not include the self-checking redundant circuitry necessary to allow its use inpersonnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition.Important:• Never operate a 1 Watt radio without connecting an antenna• Operating 1 Watt radios without an antenna connected will damage the radio circuitry.• To avoid damaging the radio circuitry, never apply power to a Sure Cross® Performance or Sure CrossMultiHop (1 Watt) radio without an antenna connected.Important:• Electrostatic discharge (ESD) sensitive device• ESD can damage the device. Damage from inappropriate handling is not covered by warranty.• Use proper handling procedures to prevent ESD damage. Proper handling procedures include leavingdevices in their anti-static packaging until ready for use; wearing anti-static wrist straps; and assemblingunits on a grounded, static-dissipative surface.ModelsModel Frequency Inputs and OutputsDX80N9X1S-P16E 900 MHz ISM Band Inputs: Two configurable asynchronous countersOutputs: Four NMOSDX80N2X1S-P16E 2.4 GHz ISM BandSure Cross® Performance Universal CounterP16E NodeOriginal Document199134 Rev. D8 November 2019199134 |
Related manuals for Banner Sure Cross DX80N2X1S-P16E
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine