Original InstructionsDecember 19, 2023p/n: 237795 Rev. ATL50 Basic Wireless Andon Tower LightInstruction Manual•••••••FeaturesMulti-Color and Audible Andon IndicatorsRugged, cost-effective, and easy-to-install Andon indicatorsIlluminated tower light segments and Andon box indicators provide easy-to-see statusFour available colors: blue, green, yellow, and redIntegral four capacitive touch button controller with status LEDsSteady or flashing status capability300 mm pre-assembled stand-off pipe lengthTwo wireless ISM radio options: 900 MHz and 2.4 GHzModelsModel LCA130T Controller Radio Frequency Tower Light DescriptionLCA130T4DXN2-TL50BGYR300Q 2.4 GHz TL50 Basic Andon Tower Light (Blue, Green, Yellow, Red)LCA130T4DXN9-TL50BGYR300Q 900 MHz TL50 Basic Andon Tower Light (Blue, Green, Yellow, Red)TL50-LCA130T Switch DiagramsThe control box status LED mimics the tower light status in color and animation.Tap one of the buttons to turn the corresponding status LED on or off. Hold the button to activate the flashing function.4321LED Key:1 = Blue2 = Green3 = Yellow4 = RedInput Pinout - All Models4-Pin M12 Male Connector Pin Wire Color Wiring Description14321 Brown (bn) 18 V DC to 30 V DC2 White (wh) Use to configure with the Pro Editor Configuration software3 Blue (bu) DC common (GND)4 Black (bk) Not UsedConfiguration InstructionsLCA130T DIP SwitchesBefore applying power to the device, set the radio's DIP switches.© Banner Engineering Corp.