Baofeng UV-5RTo program repeater 146.985, minus offset, 100 Hz tone, low power level, into Channel#010Turn on radio.If in Memory Mode switch to VFO Mode (VFO/MR)Select 5 KHz Step - (MENU + 1 + MENU) (Use the ï ñ key for 5K) (MENU + EXIT)Enter 146.985 The receive frequencyPress [MENU] + 2 + [MENU] Use the ï ñ key to select Low PowerPress [MENU] + [EXIT] To accept and exitPress [MENU] + 5 + [MENU] Use the ï ñ key to select Wide BandwidthPress [MENU] + [EXIT] To accept and exitPress [MENU] + 1 + 3 + [MENU] Use the ï ñ key to select 100 Hz TonePress [MENU] + [EXIT] To accept and exitPress [MENU] + 2 + 7 + [MENU] Enter 010 or Use the ï ñ key to select 010Press [MENU] + [EXIT] This stores the Receive FrequencyRadio prompts that REC FREQ has been storedEnter 146.385 The transmit frequencyPress [MENU] + 2 + 7 +[MENU] + [MENU] + [EXIT] Radio prompts that TX FREQ has been storedReturn to Memory Mode (VFO/MR)