1OPERATION MANUAL OF TPMS SENSORMODEL: TPM-D pro-IThank you for choosing our TPMS. This guide instructs the technician how to properlymount and dismount a Baolong Huf TPMS snap-in sensor.Introduction of TPM-D pro-ITPM-D pro-I is the transmitting module in TPMS. Its working frequency is 433.92MHz;-15dBm ≥transmitting power@3m.supply: Battery. The communication mode betweenTPM-D pro-I and receiving module is RF wireless communication. The module detectspressure and temperature inner the tire periodically and sends these information via RFoutput circuit to the receiving module. One can manually detect data inner tire by LFwake-up tools. Install it on the rim together with cycle valve.PART ONE MOUNTING AND DISMOUNTING OF TRANSMITTER1. Mounting of Transmitter1.1 Identify TransmitterCheck whether the prepared sensor is the same with the image below.Note: Only plastic or aluminum caps, aluminum valves and nickel plated valve cores can beused when replaced.①Self-lock Screw②Electronal Module