Baoyu GT-288E Manual
Safety Instruction1. Users are required to read the operation manual completely and carefully before installation oroperation.2. The product should be installed and pre-operated by well-trained persons. All power suppliesmust be turned off during the installation work, remember not to operate with power on.3. All the instruction marked with sign must be observed or executed; otherwise, bodilyinjuries might occur.4. For perfect operation and safety, it is prohibited that using extension cable with multi-outletfor power connection.5. When connecting the power cord, it must be determined that the operating voltage conformsto the rated voltage value specified in the product identification.6. Don't operate in direct sun light,outdoors area and where the room temperature is over 45°Cor below 0°C.7. Please avoid operating near the heater at dew area or at the humidity below 10% or above90%.8. Don't operate in area with heavy dust, corrosive substance or volatile gas.9. Avoid power cord being applied by heavy objects or excessive force, or over bend.10. The earth wire of power cord must be connected to the system ground of the production plantby proper size of conductions and terminals. This connection should be fixed permanently.11. All the moving portions must be prevented to be exposed by the parts provided.12. Turing on the machine in the first time, operate the sewing machine at low speed and checkthe correct rotation direction.13. Turn off the power before the following operation:1. Connecting or disconnecting any connectors on the control box or motor.2. Threading needle.3. Raising the machine head.4. Repairing or doing any mechanical adjustment.5. Machines idling.14. Repairs and high level maintenance work should only be carried out by electronic technicianswith appropriate training.15. All the spare parts for repair must be provided or approved by the manufacturer.16. Don’t use any objects or force to hit or ram the product.Guarantee TimeWarranty period of this product is 1 year dated from purchasing, or within 2 years fromex-factory date.Warranty DetailAny trouble found within warranty period under normal operation, it will be repaired free ofcharge. However, maintenance cost will be charged in the following cases even if withinwarranty period:1. Inappropriate use, including: wrong connecting high voltage, wrong application,disassemble, repair, modification by incompetent personnel, or operation without theprecaution, or operation out of its specification range, or inserting other objects or liquidsinto the product.2. Damage by fire, Earth quake, lighting, wind, flood, salt corrosive, moisture, abnormalpower voltage and any other damage cause by the natural disaster or by the inappropriateenvironments.3. Dropping after purchasing or damage in transportation by customer himself or bycustomer’s shipping agency* We make our best effort to test and manufacture the product for assuring the quality.However, it is possible that this product can be damaged due to external magneticinterference and electronic static or noise or unstable power source more than expected;therefore the grounding system of operate area must guarantee the good earth and it’s alsorecommended to install a failsafe device (Such as residual current breaker). |
Related manuals for Baoyu GT-288E
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine