Bardic FAST LiFePO4WER LFSPOT Installation - Maintenance Testing Instructions And Warranty
  |
LFSPOT2X 3W LED TWINSPOT EMERGENCYFLOODLIGHTPOWERED BY LiFePO4WER TECHNOLOGYwith BUILT-IN SENTINELTHE BARDIC WARRANTYOur goods come with guarantees that cannot be excluded underthe Australian Consumer Law. You are entitled to a replacementor refund for a major failure and for compensation for any otherreasonably foreseeable loss or damage. You are also entitled to havethe goods repaired or replaced if the goods fail to be of acceptablequality and the failure does not amount to a major failure.If the BARDIC emergency lighting fitting (the unit) is found to bedefective due to faulty workmanship or faulty materials used inits manufacture (but excluding defects due to neglect, misuse orabuse of the unit by any person) within twelve months of the date ofpurchase, it will be repaired free of charge (except the fluorescenttube and/or the incandescent globe which are not covered by thiswarranty) or, at the sole discretion of the manufacturer, replaced. Ineither case, return to the purchaser, freight paid.Any faulty unit should be forwarded FIS to the point of purchase,accompanied by the sales voucher to establish the date of purchase.The unit must be clearly marked with the name and address ofthe purchaser and the nature of the fault. If the sales voucher isunavailable at the time of claim, the warranty will be deemed to havecommenced from the packaging date as indicated by the unit datestamp.All warranty claims on the unit in question must be received by thedistributor within the 24 month warranty period. This warranty doesnot apply to any unit which is situated outside of Australia.This warranty is in addition to all other warranties rights and remediesimplied by or available under any laws in force in Australia. Any civilliability of the manufacturer howsoever arising shall insofar as thesame may be legally done be limited at the manufacturer’s option asfollows:a. Any liability for breach of warranty, subject to the said limitations,is limited in a case of goods to any one or more of the following(as selected by the manufacturer):(i) The replacement of the goods or the supply of equivalentgoods; or(ii) The repair of the goods; or(iii) The payment of the cost of replacing the goods orrequiring equivalent goods; or(iv) The payment of the cost of having the goods repairedb. And in the case of services such liability shall be limited to anyone of the following (as selected by the manufacturer)(i) The supplying of the services again;(ii) The payment of the cost of acquiring those servicesagain; The manufacturer shall not be liable for anyindirect or consequential loss however and whatsoeverarising.MPower manufactures a range of emergency lighting fittings withoutintegral batteries (commonly termed as Slaves), for operation inconjunction with central power supplies.MPower will not be responsible for any damages to slave units as aresult of connection to central power supplies operating outside thevoltage parameters specified for these slave units.Installation - MaintenanceTesting Instructionsand WarrantyMAINTENANCE RECORDOWNER: __________________________________________________ADDRESS: _________________________________________________INSTALLATION DATE: _____________ LOCATION: ________________SIX MONTHS CHECKDATE LIGHT TEST LED TEST LAMP CHECK TESTERYellow LED Indicator DescriptionGreen LED and Yellow LED ON Normal mode of operationBattery on charge and luminairepassed its last testGreen LED and Yellow LED OFF Emergency Luminaire on Test.Mains Power OFFGreen LED Permanently ON, YellowLED Flashing 4sec ON, 1sec OFFWithin the last 5 days, the emergencyluminaire passed its test.Green LED Permanently ON, YellowLED flashing continuouslyEmergency luminaire failed its last testand requires attention.Green LED Permanently ON, YellowLED flashing continuously for 5 secsThe Manual Test command isacknowledged, the test will start imme-diately battery is fully charged.The Green LED, when illuminated indicates that the battery is charging.The Green LED when OFF, indicates that the AC supply is OFF, or the emergen-cy light is running a sentinel test.The Yellow LED indicates that the Sentinel feature has been activated and theLED is normally illuminated except during periods of test and mains failure.Table showing Sentinel Indicator States |
Related manuals for Bardic FAST LiFePO4WER LFSPOT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine