Bartec TC 7 Series User Manual
  |
Datei: en_userguide_bartec_tc7x_scanhandle.docx - Datum: 16.03.20201Product Information USER GUIDESCAN HANDLEFOR EX-APPROVED TOUCH COMPUTERTC 7x SERIES© BARTEC GmbH 2019 – Subject to changes and amendments, errors expected1351. INSERTION1. Take the TC7x and put it into the left holderof the handle.2. Align the lower left side of the handleholder to the edge of the black TC7xrubber.3. Now push the right side of the TC7x downand4. move the handle a little bit forward untilthe lock catches snap into the holes at theTC7x battery release buttons.5. Then push the right holder of the handleuntil it snaps over the right side of theTC7x. Ready!If the TC7x Scan Handle is mounted in thecorrect position you will hear a gently“click” when pressing the scan button.2. Align 4. Move till snap 5.Push “click”Note: The ScanHandle isdesigned to carrythe TC7x withmountedhandstrap.For easyinsertion pleaseput thehandstrap in aflat position |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine