Assembly InstructionsFlexi-News™ cross category1. 2. 3.4.First, take base (A) and ensure brakes areapplied to the two castors that have them.Braked castors are at opposite corners ofbase.With the base locked in place, drop the bodypanel (B) into the base (A) as shown above.Next secure the body panel (B) in placewith x4 thumb screws (F). Screw the fixingsthrough holes in side of base and throughbody panel.5. 6.Repeat steps 4 and 5 for the secondconfectionery shelf (C). Next install the100mm shelf (D) above the twoconfectionery shelves (C) as shown.Next take the first of the confectionery shelves (C).Locate the slots on the sides of the shelf with thestuds on the body panel (B).Guide the slots on the sides of the shelf onto themetal studs on the body (B). Push down until theshelf ‘snaps’ into place.Tel: 0113 244 5524 Fax: 0113 244 6664 email: sales@bartuf.com web: www.bartuf.comAll dimensions are approximate and may be subject to change.All drawings and designs are protected by design right and copyright©Patents GB 2293538B.GB 2317328 US 6,112,912x1x1x1x1x2DCABFx4CCPUSHDOWNFlexi News™Cross category singleB001765