Basalte AURO KNX Series Installation Manual
Also see for 180-02: Installation manual
  |
© 2020basalte v7.0A Programming buttonB Programming LEDC KNX connectorD Mounting clipE Central IR windowSafety instructionsBefore operating the unit, please read this manual thoroughly and retain it for future reference.Failure to observe these instructions might damage the device.The device may only be installed and connected by professional electricians.All relevant rules and regulations valid in the country of use, as well as KNX guidelines, apply.DescriptionAuro is a miniature KNX motion detector, which connects directly to the KNX bus without external interface.Auro has an external diameter of 52mm, the inside fitting diameter is 43mm with an installation depth of only39mm.The detection range of Auro is set for residential applications. Horizontal reach is 360°, while the verticalreach attains circa 90°.If installed at height of 2.5m, Auro has a detection range with a diameter of approximately 5m. Maximumdetection height is 5m.The motion sensor can be used to switch or dim the lights and at the same time control the ventilation.Auro contains a built-in light sensor that can be used as an individual lux meter (180-02 only), thetemperature sensor can be used for home automation.An incorporated led allows Auro to light up with every movement but can also be used as a nightlight.ComponentsModel No. 180-02 (White)Model No. 180-03 (Black)ABCDEactual size43mm52mm1mm360°90°Installation ManualAURO KNX |
Related manuals for Basalte 180-02
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine