Basalte eve Air Quick Start Manual

Basalte eve Air Quick Start Manual Manual pdf 1 page image

265 mm/10.43”163 mm/6.42”Air table base1 Identification of the parts (product number: 638-xx, 639- xx)a. base plateb. aluminium tube (portrait version or landscape version)c. front plated. 6 x Phillips M3x10 screws (for mounting the table base)e. 4 x Phillips M6x8 screws (for mounting the Eve frame on thetable base)2 Mounting the table baseMount the base plate on the tube using four Phillips M3 screwsas shown in drawing 2.3 Mount the front plate with two Phillips M3 screws, as shown indrawing 3. (always use the horizontal holes)4 Standard USB cable (not included)Take the standard lightning USB cable, supplied with the iPadand pull it through the tube following the cable notch as shownin drawing 4.DimensionsPortrait version:265 mm/10.43” x 173 mm/6.81” x 173 mm/6.81”Landscape version:163 mm/6.42” x 173 mm/6.81” x 173 mm/6.81”173 mm/6.81”173 mm/6.81”5 Installing the Eve Air frame (not included )Screw (with the four Phillips M6 screws) the Eve frame onto thefront plate, taking into account the position of the frame (2).Ensure the screws are positioned correctly, so they cannotdamage the iPad.6 Mounting the iPad1. Plug the power connector into the iPad.Portrait versionMade in BelgiumLandscape version2. Place the iPad sideways in the small lip according t othe drawing (6).3. Gently push the iPad in the frame so that it is held bythe magnets.4. Mount the Eve cover but ensure that the cover is notsqueezing the power cable.Basalte is a registered trademark of Basalte bvba.Eve is a registered trademark of Basalte bvba.Eve, Eve Air, Eve mini and Eve touch are registered designs ofBasalte bvba.iPad, iPad Air, iPad mini, iPad mini Retina and iPod touch areregistered trademarks of Apple Inc.Puck Power supply (not included - product number: 610-01)Install the puck in the wall box following the instructions of thepuck manual. Connect the iPad to the puck, using the Lightningcable supplied with the iPad.7 Removing the iPad1. Remove the Eve cover.2. Place one finger behind the iPad and another one onthe iPad as shown in the drawing (7).3. Gently pull the iPad out of the frame making sure itcannot fall.4. Remove the power connector.Basalte bvbaHundelgemsesteenweg 1a9820 MerelbekeBelgiumtel +32 9 385 78 38fax +32 9 329 66 95info@basalte.bewww.basalte.bev1.0 © 2014 basalteACHTUNG: Die Basalte Eve Air Tablet Halterung ist nicht im Lieferumfang enthalten. Das Cover muss zusätzlich zum Standfuß bestellt werden!

/ 2

Related manuals for Basalte eve air