DIGITAL INCLINOMETEREASY TO USERange-of-motion can be read directly after the joint has been taken through its range.Place inclinometer near the joint to be measured; set the “alternate zero”; move jointthrough its range; press the “hold” button. Read range-of-motion.Digital Inclinometer Operating Instructions12-1057ver 03/14Fabrication Enterprises, Inc.PO Box 1500White Plains, NY 10602 (USA)tel: +1-914-345-9300fax: +1-914-345-9800www.FabEnt.comFEIAuthorized CE representativeRMS UK Ltd.28 Trinity RoadNailse, Somerset BS48 4NU (UK)© 2014 FEI, all rights reservedBaseline® is a registered trademark of Goldberg

Baseline 12-1057 Operating Instructions Manual