Baseus F01B User Manual
  |
Baseus F01B Tri-Mode Wireless MouseUser ManualBefore using the product, thoroughly read this manual. Keep the manual for future reference.OverviewLeft buttonRight buttonScroll wheelDPI buttonPress to change the mouse sensitivity (DPI)Note: 1600DPI mouse sensitivity by default.Mode switch buttonPress to switch between connection modes.ON/OFF buttonIndicatorBT5.0 mode2.4G modeUSB receiverConnection StepsBattery InstallationOpen the cap and install the batteries inside (make sure the polarities are connected properly), and close the cap.2.4G Mode Connection1. Turn on the mouse, and take out the USB receiver on the back.2. Connect the receiver to the device. Switch to the connection mode to 2.4G.Click and move the mouse until thecursor shows up on the screen.Wireless Mode Connection1. Turn on the mouse, switch the connection mode to wireless mode, and enter the pairing state.2. Turn on the wireless of the device, and search to pair. Select model: Baseus F01B.SpecificationsName: Baseus Creator Tri-Mode Wireless MouseModel No.: F01BMaterial: ABSTransfer Distance: 20m, 10mConnection Type: 2.4G mode + dual-wireless modeWireless Version: BT5.0,Sensitivity: 800/1200/1600DPIResponse Frequency: 250HzCompatible Systems: Windows, HarmonyOS, Apple OS, Linux, Vista, etc.g onWarningsImproper use of the product can easily cause damage to the product or may endanger personal and propertysafety. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine