Rev. 04/17/03PARTS BREAKDOWN & OPERATING MANUALOld 1500-CJNew 1500-PV750 LB. ENGINE STANDRefer to Engine Service Manual forCorrect Lifting Points, MountingPoints and Mounting Bolts!Mounting bolts shouldbe torqued at appropriate amountto maintain load.DO NOT OVERLOAD. OVERLOADING CANCAUSE DAMAGE TO, OR FAILURE OFTHE STAND.THIS STAND IS DESIGNED FOR USE ONLYON HARD LEVEL SURFACES CAPABLE OFSUPPORTING THE LOAD. USE ON OTHERTHAN HARD LEVEL SURFACES CANRESULT IN STAND INSTABILITY ANDTIPPING OF LOAD.LOCK THE MOUNTING-PLATE ROTATINGMECHANISM BEFORE APPLYING A LOAD.RELEASE ROTATIONAL LOCKING DEVICESLOWLY AND CAREFULLY.ALWAYS USE HIGH STRENGTH SAE GRADE8 BOLTS FOR ENGINE MOUNTING BOLTS.MAKE SURE WIDEST SET OF MOUNTINGHEAD FINGERS ARE NEAREST THEGROUND WHEN MOUNTING AN ENGINETO THE STAND.ALWAYS BE SURE THAT THE LOAD ISCENTERED AND SECURED TO THEMOUNTING PLATE. OFF-CENTER LOADSMAY MAKE THE LOAD AND HANDLEROTATE IN EITHER DIRECTION WHENTHE ROTATIONAL LOCKING DEVICE ISRELEASED.NEVER LOOSEN MOUNTING BOLTSUNLESS ENGINE IS SUPPORTED BY ACRANE OR HOIST.DO NOT USE STAND TO DOLLY ORTRANSPORT ENGINES.NO ALTERATIONS TO THE STAND ORADAPTERS SHALL BE MADE.DO NOT ROTATE MOTOR UNLESS REARLEGS ARE SECURED FROM TIPPING.READ, STUDY AND UNDERSTAND ALLINSTRUCTIONS BEFORE OPERATING.FAILURE TO HEED THESE WARNINGS MAYRESULT IN LOSS OF LOAD, DAMAGE TOSTANDS, AND/OR FAILURE RESULTING INPROPERTY DAMAGE, PERSONAL ORFATAL INJURY.