© 2015 CALAMP / MBUD-0278v1 | 05/2015 WWW.CALAMP.COMQuestions? Call: 888-823-7237 or Email: techspecialists@calamp.comCVF-200 InstallationQuick Start GuideThe CVF-200 is a full-featured, GPS product designed for collateral asset protection in automobiles. The new, smaller-sizeddevices are equipped with CalAmp’s proprietary SkySmart technology, providing customers with any required OTA (over-the-air)updates device updates, dual processor performance and standard battery backup. The CVF-200, when coupled with theLenderOutlook TM collateral assurance solution, is ideal for vehicle finance, auto rental and location-based applications.The CVF –200 series offers three device model options. All models include battery backup and a motion detector. The batterybackup provides protection against potential tampering, and the motion detector provides notification if a vehicle is towed.Additionally, the CVF-200 series supports LenderOutlook’s Mileage Manager and Location Validation Reporting.P/N Device Type DescriptionBackupDisconnect &Tow AlertsLocation ValidationAnalyticsOn-lineRenewalsCVF-200-23 CDMA, Locate Only CVF-200-24 CDMA, Locate with Starter Disable CVF-200-27 CDMA, Locate with Starter Disable and Payment Reminder CVF-200 Wiring HarnessWire Wire Gauge Color Signal Name Description Input/Output1 22 Red Power Primary power to the CVF 12V Nominal Battery Positive2 22 Black Ground Vehicle or Chassis Ground Battery Negative3 22 White Ignition Ignition wire Required for Starter Disable & TowAlert4 22 Green Output 0 Output to Starter Disable Relay Output to Starter Disable Relay5 22 Blue Input 1 Not Used Not Used6 22 Blue/White Output 1 Output to Payment Reminder Buzzer Output to Payment Reminder BuzzerCVF-200 INSTALLATION PROCESS – EASY AS 1-2-3STEP ONE: SELECT THE INSTALLATION LOCATIONThe CVF-200 must be installed in a horizontal position, label-side up and unobstructed by metal.For optimal performance, CalAmp recommendsan in-dash installation.• above the gauge cluster• above the air vent• above the glove box