Camlogic PFG05L Series Use And Maintenance Manual

Also see for PFG05AT: Use and maintenance manual

Camlogic PFG05L Series Use And Maintenance Manual Manual pdf 1 page image

COSTRUZIONI MECCANICHE ELETTRICHEUse and maintenance manual for rotary level indicator series PFG05L & PFG57LPRODUCT IDENTIFICATIONThe PFG05L and PFG57L series instruments are rotary level indicators for granular solids. The identification of the device isaccomplished by the specific label outside the casing, whose characteristics are shown below:Tampering with the label entails the loss of validity of the product certifications.INSTALLATIONUse and maintenance manual for rotary level indicator series PFG05 & PFG57 0601_002_0_rev2 - 10.2022 Page 1 of 4The device can be installed in any position. In case of an horizontal or titledinstallation, mount the device with the cable entrance on the right side forPFG05L models, or lower side for PFG57L models. The coupling of theinstrument with the wall of the container (silos) can be either threaded oranged; images 2 and 3 show the standard couplings. Always refer to thetechnical drawings supplied by the Manufacturer together with this manual.Protect the device from falling material or excessive weight, using protectivedeectors. For cable entries, 1 (one) or 2 (two) G 1/2 threaded holes (BSPP) areavailable. Seal the cable entries with cable glands or sealing caps suitable forthe operating range shown on the label.The protective caps supplied with the device are only for protection duringtransport and storage, they are not suitable for the use of the instrument and it isresponsibility of the installer to replace them.The diameter of the power supply cable must correspond to the tightening range indicated by the cable gland used.1. Production year of the instrument2. Manufacturer data3. Product model and electrical rating4. Warnings5. Ambient temperature range:-20°C ÷ +70°C (standard application, all models)-40°C ÷ +70°C (low temperature applications, models PFG*...BL)Maximum process temperature:+70°C (standard applications)+200°C (high temperature applications, models PFG*...ATL)6. Conformities and Notied Body number7. Serial number8. Ex markingEx MARKING DETAILSII 3 D tcEx IIIB T** Dc ATEX MARKING (2014/34/EU / S.I. 2016 No. 1107)European community marking for equipment intended for use in areas under risk ofexplosion.Group II equipment intended for use in surface industry.Category 3 equipment, suitable for use in areas classified Zone 22.Combustible dusts; combusible substance present in the area of installation and theinternal volume.Ex symbol.Protection method Ex t - protection from the ignition of combustible dusts from enclosure.For combustible dusts type IIIB (suitable for use with any kind of dust).Temperature class (maximum surface temperature the device can reach):T85°C = standard versionT200°C = high temperature versions (PFG-*.../AT)EPL (Equipment Protection Level) - Protection level Dc = increased, which is not a source ofignition during normal operation.IMG.112345678RS.a.s. di Guazzetti Giovanni & C.Via dell'Industria 12 - 12/A - 42025 CAVRIAGO - RE - ItalyCF/PI/Iscr.Reg.Imprese RE 00303000350VAT IT00303000350 REA 90637Telefono/Phone +390522942641 / +390522941172www.camlogic.it - email: camlogic@camlogic.it0948

/ 4

Related manuals for Camlogic PFG05AT