Canon BJC-S830D Setup Instructions

Also see for S830D: Quick start guide User guide Service manual Reference guide Brochure & specs

Contents

start here

Canon BJC-S830D Setup Instructions Manual pdf 1 page image

Install the Ink TanksUnpack the Printer1 2 3 4 5Prepare the Printer Install the Print HeadPhoto PrinterConnect the PrinterTo Your ComputerStart HereEasy Setup InstructionsS830DTurn the printer off.Connect one end of the USB cableto the computer, the other to the printer.IMPORTANT: Be sure the printer isoff before continuing, or the computerwill attempt to install the printerdriver before the printer is ready.Continue with Step 6on side two.USB PortUSB CableInsert the ink tank into the correct slot.(Refer to the color guide on the print head.)Press down gently until the ink tank locksinto place.Electrical contactsGently slide the print head into the holder.The print head will rest at a slight angle.Do not press it down.Remove the print head from its package.Turn the print head over, then removethe orange protective cap.NOTE: Do not touch the electrical contacts.Lower the lock lever and gently pressit down until it locks into place.Raise the gray lock lever.Plug the power cord into the back of theprinter and connect the other end to apower outlet.Open the front cover. The print head holderautomatically moves to the center. Removethe protective tape.Write down the serial number located tothe right of the print head. You will needthis later to register the product.Protective tapeSerial numberPress the POWER button.Remove the shipping tape from the frontand sides of the printer. Peel off the protectivefilm from the LCD panel.POWERLampPOWERButtonCarefully remove all items from the box.S830DPhoto PrinterDocumentationand Software KitPaper RestOutput TrayPull the orange tab off the yellow ink tank(BCI-6Y), then remove and discard theplastic wrapper.Twist off and discard the orangeprotective cap.NOTE: To avoid spilling ink, never press onthe sides of an ink tank.Insert the remaining five ink tanks intotheir assigned slots.Close the front cover and attach thepaper rest and output tray.Protective capInk TanksBCI-6C Cyan BCI-6M MagentaBCI-6BK Black BCI-6Y YellowBCI-6PC Photo Cyan BCI-6PM Photo MagentaPower CordS830D Print HeadDirect Interface CablesCompactFlash™ Card AdapterShipping TapeProtective Film12341543121234512

/ 2

Related manuals for Canon S830D