Playback Mode:Standard Information viewDetailed Information viewNo InformationA.Connect the camera to the printer and turn on theprinter's power.B. , , appears* in the upper-left corner of the camera'sLCD monitor, indicating that the printer is ready to print.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○Quick ReferenceSwitching Between Shooting/PlaybackShooting Modes: Shoots with settings selected by the camera.: PortraitThe background is blurred and the subject isin clear focus: LandscapeFor shooting landscape scenes.: Night SceneFor photographing human subjects against thebackdrop of an evening sky or a night scene.: Special SceneSelect from six scene modes to shoot with the most appropriatesettings for the scene.: My ColorsUse these modes to change image colors and then shoot.: Stitch AssistImages shot in Stitch Assist mode can be merged together on acomputer to make a single panoramic image.: MovieFor shooting movies.CreativeZoneImageZoneAutoC. Select the image that you want to print with the B or Abutton on the omni selector and press the button.The button will flash blue and printing will start.➜ Direct Print User GuideMacro ShootingPress the button to display the on the LCD monitor. Use this modeto shoot close-ups of flowers or small objects.* Recordable Area at Minimum Shooting Range At max. wide angle end: approx. 118 x 87 mm (4.6 x 3.4 in.)Changing the Displayed InformationPress the DISP. button to switch the displayed information, as follows.In addition, there are functions that can be set in each shooting mode. Fordetails refer to “Functions Available in Each Shooting Mode” at the end of theCamera User Guide.Shooting:Turn the mode lever to while pressingthe release button.Playback:Turn the mode lever to while pressingthe release button.The following manuals are supplied with your camera. Please refer to themas need be.Contents of This GuideB. Play back the images.Use the B or A button to display the image youwish to see.Mode LeverReleaseButtonA ButtonB ButtonA.Use the B or A button on theomni selector to select theimage that you want to erase( ) and press the button( ).B. When the confirmation screen appears, checkthat [Erase] is selected and press the SET button.Select [Cancel] using the B or A button on the omni selector tocancel without erasing.B. Insert the batteries asshown.C. Close the battery cover.D.Open the memory card slotcover.Reference GuidesQuick StartGuideDirect Print User GuidePrinter UserGuide•Camera User Guide•Software Starter Guide• ZoomBrowser EXSoftware User Guide• ImageBrowserSoftware User GuideThisguideSystem MapSupplied witha printerErasing an ImageCamera User Guide4○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○Preparing the CameraPlayback➜ Camera User Guide1○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○A.Turn the mode lever to (Playback)while pressing the release button.- If you wish to use the LCD monitor, open it.- The power/mode lamp lights green.1. Install the batteries and thememory card.2. Shoot images with the camera.3. Play back the images.4. Erase any unwanted images.Learn the names of cameracomponents.5. Print the images.Included accessories and separatelysold equipment information.6. Install the software.Connect the camera to acomputer.The various ways of using thesoftware.What you can do with thesoftware.7. Download the images to acomputer.A.Turn the mode leverto (Shooting)while pressing therelease button.B. Turn the mode dial to .C. If you wish to use the LCDmonitor, open it.D.Set the date and time. The first time youturn on the camera, you must set thedate and time.E. Aim the camera at the subject and adjust the zoom toachieve the desired composition. (See “Zoom” in the “QuickReference”section.)F. Focus and shoot.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○➜ Camera User Guide2 ShootingPress the shutter buttonall the way to shoot.➜ Camera User Guide ➜ Camera User Guide➜ Camera User GuidePrinting with a Direct Print Compatible Printer5PrintersThese PDF format guidesare available on the Canonwebsite. Please downloadthem from the followingURL: http://web.canon.jp/Imaging/Information-e.html○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○A.Open the batterycover.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○E.Mode LeverReleaseButton○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○CameraPower/ModeLampThe Power/Mode lamp lights orange.Power/ModeLampRelease buttonWith the label side up, insert thememory card into the slot.Insert the memory card all the wayuntil it clicks.Slide the memory card slot coverclosed.Shooting mode:LCD monitor - On (no information)LCD monitor - On (information view)LCD viewfinder - On (no information)LCD viewfinder - On (information view)Continuous Shooting/Self-timerPress the / button to cycle through the settings.(Some settings are not available with certain shooting modes.)Single image shootingContinuous shooting/ / Self-timer (10 sec.) / Self-timer (2 sec.) / CustomZoomWide AngleZoom out from the subject.TelephotoZoom in on the subject.* The zoom can be adjusted from 36 to432 mm (35 mm film equivalent).TelephotoWide AngleUse the B or A button on the omniselector to select the items that you want toset, and then use the C or D button on theomni selector to change the value.Check that the date and time shown arecorrect, and then press the SET button.Press the shutter button half-way to focus.The camera focuses and beepstwice.* The displayed icon may vary depending on the printer model.To remove the memory cardPush the memory card until the card clicks and then release it.Flash Range: 70 cm - 5.2 m (2.3 - 17.1 ft.) (wide-angle)70 cm - 4.0 m (2.3 - 13.1 ft.) (telephoto)* Red-eye reduction: This feature reduces the effect of light reflecting backfrom the eyes and making them appear red.FlashWhen the blinks red on the LCD monitor or viewfinder, or when you wish to use theflash, raise it manually. Once the flash is raised, press the button to cycle between flashmodes. Some flash modes are not available with certain shooting mode.When the red-eye reduction functionis onAuto with red-eye reductionFlash on with red-eye reductionFlash off (when flash is lowered.) Flash off(when flash is lowered)When the red-eyereduction function is offAutoFlash on3○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○CDI-E178-010 © 2005 CANON INC. PRINTED IN JAPANXXXXXXXXPlease turn overInterface cable
