Canon POWERSHOT SX500 IS Getting Started Manual

Also see for PowerShot SX500 IS: Getting started Getting started User guide User guide User guide

Canon POWERSHOT SX500 IS Getting Started Manual Manual pdf 1 page image

CaHOHo rShot 5X500 !.5CDP-E493-010 © CANON INC. 2012Getting Started,, Before use, be sure to read this guide.,, Reading this guide will help you learn to use the camera properly.* Store this guide safely so that you can use it in the future.Before use, make sure the following items are included in thepackage. If anything is missing, contact your camera dealer.(_Camera @Battery Pack NB-6L (with terminal cover)(_Battery Charger CB-2LY/CB-2LYE*(_Neck Strap NS-DCll (_)Lens Cap (with cord)_lnterface Cable IFC-400PCU_DIGITAL CAMERA Solution Disk (_Getting Started (this guide)* Power cable also included.Install PDF manuals and software from the included DIGITALCAMERA Solution Disk. Note that Adobe Reader is required to viewthe PDF manuals.Insert the included DIGITAL CAMERA Solution Disk in thecomputer's CD-ROM drive and follow the installation instructions.After installation, you can access the Camera User Guide bydouble-clicking the desktop shortcut icon.For software instructions, refer to the Camera User Guide or theImageBrowser EX help.The following memory cards (sold separately) can be used,regardless of capacity.• SD memory cards* • SDXC memory cards*_',_P"• SDHC memory cards* • Eye-Fi cards _r_-• Conforms to SD specifications. However, not all memory cards have beenverified to work with the camera.About Eye-Fi CardsThis product is not guaranteed to support Eye-Fi card functions(including wireless transfer), in case of an issue with an Eye-Ficard, please check with the card manufacturer. Also note that anapproval is required to use Eye-Fi cards in many countries orregions. Without approval, use of the card is not permitted. If it isunclear whether the card has been approved for use in the area,please check with the card manufacturer.Remove the battery cover and insert the _mbattery in the charger,After aligning the A marks on the battery and charger, insertthe battery by pushing it in ((_) and down ((_)).Battery chargers with a plug:Flip out the plug and plug the charger into a power outlet. Thelamp turns orange.Battery chargers with a power cord:Connect the power cord to the battery charger, and then plugthe other end into a power outlet.When charging is finished, the lamp turns green. Remove thebattery.Slide the cover ((_) and open it ((_).Holding the battery with the terminals ((_) facing as shown,move the battery lock in the direction of the arrow, insert thebattery, and push it in all the way until the lock clicks shut.To remove the battery, press the battery lock in the direction ofthe arrow.Shooting is not possible with cards that have a write-protecttab ((_) in the locked position. Slide the tab up until it clicksinto the unlocked position.Insert the memory card with the label (@) facing as shownuntil the lock clicks shut.To remove the memory card, push it in until you feel a click,and then slowly release it.Lower the cover (@) and hold it clown as you slide it, until itclicks into the closed position (@).® ®® ®@@@@@@@@@@@@Press the power button to turn the camera on. The [Date/Time] screen is displayed./,_£Set°t'_he_d_ate _a_nd_ti,m_;_,__Press the <4><_'> buttons to choose an option, and thenadjust the setting, either by pressing the <,_> buttons orturning the <@> dial.When finished, press the <@> button.@@ Press the <_><_> buttons or turn the <_i_;> dial to choose@ your home time zone.Press the <@> button when finished. After a confirmation@ message, the setting screen is no longer displayed.CB-2LY@@@@@@@@@, CB-2LYE @@@!i@÷@@@@@@@@@@@_ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Change the date and time.1 Press the button.2 Move the zoom lever to choose the [_'1']tab.3 Press the <,_> buttons or turn the <_./_;>dial to choose [Date/Time], and then press the <@> button.4 Follow step 5-2 to configure the setting, and then press the button.Press the button.Press and hold the <@> button, and then immediately pressthe button.Press the <4><_> buttons or turn the <_i_!> dial tochoose a language, and then press the <@> button.Turn the camera on and enter <_>[ mode.Press the power button and set the mode dial to <_8]_)>./i_ .........................................................................................................................................................................................................................................................................................................Compose the shot,To zoom in and enlarge the subject, move the zoom levertoward (telephoto) as you watch the screen, and tozoom away from the subject, move it toward <_> (wideangle).[ Shoot still images.Press the shutter button lightly ((_).The camera beeps twice after focusing, and AF frames aredisplayed to indicate image areas in focus. Press the shutterbutton all the way down ((_)).Shoot movies.Press the movie button to start shooting, and press it again tostop.Press the button......................................................To view the previous or next image, press the <_><_'> buttonsor turn the <@> dial.Movies are identified by a [_L_] icon. To play movies, go tostep 8-3.Play movies.Press the <@> button to access the movie control panel,choose [t_'] (either press the <4><_'> buttons or turn the <_ii_>dial), and then press the <@> button again.Movie playback begins, and you can adjust the volume asneeded by pressing the <_> buttons.After the movie is finished, [_] is displayed.[ _-rase the _mages. }1 Press the <_> button.2 After [Erase?] is displayed, press the <4><_> buttons or turn the<_i_;> dial to choose [Erase], and then press the <@> button.ii ili

/ 2

Related manuals for Canon PowerShot SX500 IS