CANON POWERSHOT A75 BASIC INSTRUCTIONSThe Canon A75 is a modern, full function digital camera that can be set up tohandle almost any situation. For our purposes we have set it up to perform as a simple“Point and Shoot” camera. This will yield very good results and doesn’t require theuser to be a skilled photographer.The camera is set up for automatic focusing and exposure. The flash will operateautomatically in low light with the “red eye reduction” feature activated. Thecompression and resolution settings will produce approximately 94 high qualityphotographs on the memory card. The camera will have charged batteries and a blankmemory card installed, you shouldn’t have to change them, but if you do instructionsare provided. DO use the belt loop and wrist strap to hold the camera, and DON’Tleave the camera where it can get too hot or too cold – like in a car.ZOOM CONTROL SHUTTER RELEASETO TAKE A PICTURE Slide the MODE SWITCH up for shooting. (see next picture) Press ON/OFF button on. The power on light turns green. The lens projectsand the liquid crystal display (LCD) screen turns on. Compose picture in viewfinder, or on the LCD screen. Use the ZOOMCONTROL to frame subject. Push right to zoom in, left to zoom out. Press SHUTTER RELEASE button down half way to have camera focus. Press SHUTTER RELEASE button all the way down to take the picture.