Canon VB-H610VE Installation Manual

Also see for VB-M600VE: User guide Administrator's manual Operation guide Viewer Operation Guide Operation guide

Canon VB-H610VE Installation Manual Manual pdf 1 page image

Network Camera/ / /Installation GuideYT1-1637-000Thank you for purchasing Canon Network Camera VB-H610VE/VB-H610D/VB-M600VE/VB-M600D(hereafter referred to as the camera).VB-H610D/VB-M600D is designed for indoor use only. It is also possible to install the VB-H610VE/VB-M600VE outdoors, such as underneath eaves.Be sure to read “Installation Guide” (this document) and “Operation Guide” (included in the SetupCD-ROM) before use.This “Installation Guide” explains the installation method for installing the camera on a ceiling orwall and the installation method using the separately sold junction box mounting kit PS600-VB. Besure to read the “Safety Precautions” section for correct use. After reading this Installation Guide,keep it in a readily accessible location for future reference.For the installation of this camera recessed into a ceiling or wall using the recessed mounting kit(sold separately), please read the “Recessed Mounting Kit SR600-VB Installation Guide” includedwith the recessed mounting kit.When using the heater unit (sold separately), please read the “Heater Unit HU600-VB UserManual” included with the heater unit.The detailed procedures for using this camera are explained in the “Operation Guide”. Readthese guides carefully before using the camera to ensure correct use.* For the latest information (firmware and included software, user manuals, operatingenvironment, etc.), please refer to the Canon Web Site.Caution Request a professional installer for all camera installation work.Never try to install the camera yourself. Doing so may result inunforeseen accidents such as dropping the camera or electric shock.Check Included ItemsThis product comes with the following items. If any item is missing, contact the dealer where youpurchased the product.1. Camera( VB-H610VE/VB-H610D/VB-M600VE/VB-M600D)2. Power connector3. Safety wire 4. Audio interface cable5. Templatefor VB-H610VE/VB-M600VEfor VB-H610D/VB-M600D6. Dome case lock screw wrench(VB-H610VE/VB-M600VE only)7. Setup CD-ROM9. Warranty card8. Installation Guide (This document)10. NoticeEuropean Union (and EEA) only.These symbols indicate that this product is not to be disposed of with yourhousehold waste, according to the WEEE Directive (2002/96/EC), the BatteryDirective (2006/66/EC) and/or national legislation implementing those Directives.If a chemical symbol is printed beneath the symbol shown above, inaccordance with the Battery Directive, this indicates that a heavy metal (Hg= Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a concentrationabove an applicable threshold specified in the Battery Directive.This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling wasteelectrical and electronic equipment (EEE) and batteries and accumulators.Improper handling of this type of waste could have a possible impact on the environment and humanhealth due to potentially hazardous substances that are generally associated with EEE.Your cooperation in the correct disposal of this product will contribute to the effective usage ofnatural resources.For more information about the recycling of this product, please contact your local city office, wasteauthority, approved scheme or your household waste disposal service or visitwww.canon-europe.com/weee.(EEA: Norway, Iceland and Liechtenstein)User Manuals• Installation Guide (This document)This guide provides notes on camera installation and explains the procedures to install thecamera onto a ceiling or wall.• Operation Guide (Included in the Setup CD-ROM)This document explains the initial camera settings, Admin Tools settings, viewer operationsand troubleshooting, etc.Symbols Indicating Camera ModelCamera specific functions will be listed using the icons below.: VB-H610VE : VB-H610D: VB-M600VE : VB-M600DAccessoriesAccessories can be purchased separately as necessary.Recessed Mounting Kit SR600-VBThis dedicated accessory is used to install the camera recessed into a wall or ceiling.Junction Box Mounting Kit PS600-VBThis dedicated accessory is used to mount the camera to a junction box.Heater unit HU600-VBThis dedicated accessory is attached to the interior of VB-H610VE/VB-M600VE to maintainoperation temperature within the dome and achieve stable operation even in extremely coldenvironments.AC Adapter PA-V17A dedicated AC adapter for this camera.Symbols Indicating Safety PrecautionsThis Installation Guide uses the following marks to indicate important information theuser should know in order to use the product safely. Be sure to observe these items.Warning Inappropriate handling against the instruction accompaniedby this sign may result in death or serious injury. Be sure toobserve these warnings to ensure safety.Caution Inappropriate handling against the instruction accompaniedby this sign may result in injury. Be sure to observe theseprecautions to ensure safety.Caution Inappropriate handling against the instruction accompanied bythis sign may result in property damage. Be sure to observe theseprecautions.Important This symbol indicates important or restricted items. Be sure toread this section.Note Contains reference information for operation or additionalexplanations.Safety PrecautionsThis section explains precautions that must be observed when using the camera. If theyare not observed, injury, death and/or property damage may occur. Read the followinginformation carefully and be sure to observe the precautions.Installation PrecautionsWarningDo not install in the following places:• Places in strong direct sunlight, near heat-generating objects, or subject to hightemperatures• Places near fire sources or flammable solvents (alcohol, thinner, fuel, etc.)• Humid or dusty places• Places subject to oily smoke or steam• Places subject to sea air• Confined or enclosed placesFire or electric shock may result.Write the serial number and MAC address of the camera (printed on the seal at the bottom ofthe camera) in the field below before storing this Installation Guide in a safe location.Serial number _________________________________MAC Address _________________________________© CANON INC. 2012 Printed in TaiwanENGLISH Main SpecificationsCameraImage Sensor 1/3 type CMOS (primary color filter)Number of Effective Pixels Approx. 2.1 million pixelsApprox. 1.3 million pixelsScanning Method ProgressiveLens 3x optical (4x digital) zoom lens (electric drive)3x optical zoom lens (electric drive)Focal Length* 1 2.8 (W) – 8.4 mm (T)F-number F1.2 (W) – F2.0 (T)Viewing Angle Horizontal: 111.0° (W) – 36.5° (T)Vertical: 60.1° (W) – 20.5° (T)Horizontal: 101.2° (W) – 33.7° (T)Vertical: 74.7° (W) – 25.3° (T)Day/Night Switch Auto/ManualMin. Subject IlluminationDay Mode (color) 0.3 lux (F1.2, shutter speed 1/30 sec., when smart shade control isoff, 50IRE)0.02 lux (F1.2, shutter speed 1/2 sec., when smart shade control isoff, 50IRE)0.008 lux (F1.2, shutter speed 1/2 sec., when smart shade controlis on, 50IRE)0.25 lux (F1.2, Shutter Speed 1/30 sec., when Smart Shade Controlis off)0.07 lux (F1.2, Shutter Speed 1/8 sec., when Smart Shade Controlis off)0.018 lux (F1.2, Shutter Speed 1/8 sec., when Smart Shade Controlis on)Night Mode (monochrome) 0.015 lux (F1.2, shutter speed 1/30 sec., when smart shade controlis off, 50IRE)0.001 lux (F1.2, shutter speed 1/2 sec., when smart shade controlis off, 50IRE)0.0005 lux (F1.2, shutter speed 1/2 sec., when smart shade controlis on, 50IRE)0.008 lux (F1.2, Shutter Speed 1/30 sec., when Smart ShadeControl is off)0.002 lux (F1.2, Shutter Speed 1/8 sec., when Smart Shade Controlis off)0.001 lux (F1.2, Shutter Speed 1/8 sec., when Smart Shade Controlis on)Focus One-shot AF/Manual/Fixed at infinityShooting Distance Day Mode: 0.3 m (12 in.) – infinity(from front of lens) Night Mode: 1.0 m (3.3 ft.) – infinityShutter Speed 1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000,1/4000, 1/8000, 1/16000* 4 sec.Exposure Auto/Auto (Flickerless)/Auto (Shutter-priority AE)/Manual (Shutter Speed, Aperture,Gain)White Balance Auto/Light Source (Daylight Fluorescent/White Fluorescent/Warm Fluorescent/Mercury Lamp/Sodium Lamp/Halogen Lamp)/Lock (One-shot WB)/ManualMetering Mode Center-Weighted/Average/SpotExposure Compensation 9 levels 7 levelsSmart Shade Control 7 levels (increases the brightness of shaded subjects in a video)AGC Limit 5 levelsPan Angle Range 350° (±175°)Tilt Angle Range 150° (±75°)Rotation Angle Range 350° (±175°)Moving Speed Pan: 19.2°/sec., Tilt: 14.2°/sec., Rotation: 43.7 °/sec.When the Camera Angle Setting Tool is usedServerVideo Compression Method JPEG, H.264Video Size JPEG: 1920 x 1080, 960 x 540, 480 x 270, 320 x 240H.264: 1920 x 1080, 960 x 540, 480 x 270JPEG: 1280 x 960, 640 x 480, 320 x 240, 160 x 120H.264: 1280 x 960, 640 x 480, 320 x 240Video Quality JPEG, H.264: 5 levelsFrame Rate*2 JPEG: 0.1 – 30 fpsH.264: 1/2/3/5/6/10/15/30 fpsH.264: 10/15/30 fpsMax. Frame Rate 1920 x 1080 (when streaming): 30 fps1280 x 960 (when streaming): 30 fpsI-Frame Interval 0.5/1/1.5/2/3/4/5 sec.Simultaneous Client Access Max. 30 Clients + 1 Admin ClientH.264: Max. 10 ClientsCamera Control Administrator, Authorized user, Guest user (level of control varies depending onuser)Max. 50 user names and passwords registered for authorized users.Access Control User authority (user name and password), Host Access Restrictions (IPv4, IPv6)Encrypted Communications SSL/TLS, IPsec (Auto Key Exchange/Manual)Protocol IPv4: TCP/IP, UDP, HTTP, FTP, SNMP (MIB2), SMTP (Client), DHCP (Client), DNS(Client), ARP, ICMP, POP3, NTP, SMTP authentication, RTSP, WV-HTTP(Canon proprietary), ONVIFIPv6: TCP/IP, UDP, HTTP, FTP, SMTP (Client), DHCPv6 (Client)*4, DNS (Client),ICMPv6, POP3, NTP, SMTP authentication, RTSP, WV-HTTP (Canonproprietary), ONVIFAutoIP AvailableAudio Compression Method G.711 μ-law (64 kbps)Audio Communication Method Full-duplex (two-way) Echo cancellation function compliantSound Transfer Protocol by CanonAudio File Playback* 3 Available (audio files can be played back when an event is triggered by theintelligent function or external device input.)Privacy Mask Number of registration: Max. 8 places, Number of mask colors: 1 (select from 9colors)Preset Max. 20 positions (Preset Tour capable)Intelligent Function

Detection Types: moving object detection, abandoned object detection,removed object detection, camera tampering detection, and passing detection* 4Detection Settings: Max. 15Volume DetectionEvent Trigger Type External Device Input, Intelligent Function (Video), Intelligent Function (Volume),TimerImage Upload FTP/HTTP/SMTP (e-mail)Temporary storage memory in camera : Max. approx. 5 MBMax. approx. 4 MBFrame Rate: Max. 10 fpsEvent Notification HTTP/SMTP (e-mail)Image Cropping Function Digital PTZ Cropping sizes : 640 x 360/512 x 288/384 x 216/256 x 144/128 x 72On-Screen Display AvailableDaylight Saving Time AvailableLanguage English/German/French/Italian/Spanish/Japanese“ONVIF” is a trademark of ONVIF Inc.External DimensionsVB-H610VE/VB-M600VEVB-H610D/VB-M600DJunction Box Plate4.2 (0.17)46 (1-13/16)83.5 (3-9/32)46 (1-13/16)83.5 (3-9/32)85.7 (3-3/8)85.7 (3-3/8)14- 4.5 ( 0.18)(Junction box fixing holes)Notes on Privacy and Publicity Rights Regarding the Use of Video/AudioWhen using the camera (for video or audio recording), it is the full responsibility of the user toprotect privacy and avoid any violation of publicity rights. For example, obtain consent to installthe camera in advance if specific buildings or rooms are to be monitored. Canon shall have noliability whatsoever in this regard.Legal NoticeIn some cases, camera monitoring may be prohibited by law or regulation, the details of whichdiffer by country or region. Before using the camera, check the laws or regulations of the countryor region where the camera is used.CautionFor installation or inspection of this camera, consult the dealer where you purchasedthe product.• This installation should be made by a qualified service person and should conform toall local codes.• When installing on a ceiling, make sure the surface is capable of withstanding the totalweight of the camera and ceiling plates and is sufficiently reinforced if necessary.• Periodically check the parts and screws for rust and to see if they have loosened, inorder to prevent injuries and equipment damage due to falling items.• Do not install in unstable places, places subject to significant vibration or impact, orplaces subject to salt damage or corrosive gas.• Be sure to attach the safety wire when installing the camera.Failure to do so may result in the camera falling or other accidents.• Do not touch the edge of metal parts with bare hands.• Be careful not to trap your fingers during installation of the camera.Injury may result.Caution• Do not install the camera on an unstable surface.• To maximize shock resistant specifications, do not install on insufficiently strongsurfaces or surfaces subject to significant vibration (VB-H610VE/VB-M600VE).• Take measures to remove static electricity before performing any procedures.Malfunction may result.• Take care not to damage wiring or pipes in the room.Damage to peripheral items may result.Precautions for Installing the Camera Outdoors (VB-H610VE/VB-M600VE)When installing the VB-H610VE/VB-M600VE outdoors, observe the following precautions to retainwaterproof/dustproof capabilities..Position thewiring holestraight down• Be sure to install the camera under eaves or other places out ofdirect sunlight.• Install the camera in a place unexposed to long periods of directrainfall.• When mounting the camera onto a wall or other upright surface,position the wiring hole straight down to prevent rain infiltration.• If wiring the camera through the wiring hole on the bottom, usesilicone sealant or a rubber mat to ensure waterproofing. Alsouse an insect repellent sponge if necessary.• If wiring with a composite pipe (NPT 3/4 inch threaded hole)attached to the wiring hole, wrap teflon tape around the tip of thepipe, clear any debris from the wiring hole and firmly tighten thepipe. Apply silicone sealant after attaching the pipe.• Firmly fix the dome case to the main unit of the camera with the lock screws, taking care not topinch cables between the main unit and dome case.Precautions for UseWarning• If you discover defective conditions such as smoke, strange sounds, heat or strangeodors, immediately stop using the camera and contact your closest dealer.Fire or electric shock may result from continued use of the product.• Do not disassemble or modify the camera.• Do not damage the connecting cable.• Do not spill water or other liquid inside the camera, spray the camera with water, orotherwise make it wet.• Do not insert foreign objects into the camera.• Do not use flammable sprays near the camera.• Do not leave LAN cables, external power supplies or AC adapter (sold separately) powerconnectors connected when the camera is not in use for long periods.• Do not use flammable solvents such as alcohol, paint thinner or benzine when cleaningthe camera.Fire or electric shock may result.Notes on Power SupplyWarning• Only use the dedicated AC Adapter PA-V17 (sold separately) for AC power.• Do not set any heavy objects on the power cable.• Do not pull, forcibly bend, scratch, or modify the power cable.• Do not cover or wrap the AC adapter (sold separately) with cloth or blankets.Fire or electric shock may result.Be sure to read the user manual for the PA-V17 (sold separately) before use.Caution• After turning off the power, wait for at least five seconds before turning the power onagain. If the power is turned on again too quickly, the camera may operate poorly.InterfaceNetwork Terminal LAN x 1 (RJ45, 100Base-TX (auto/full-duplex/half-duplex))Audio Input Terminal 3.5 mm ( 0.14 in.) mini-jack connector (monaural)(common for LINE IN & MIC IN) Connect via an audio interface cable (included)Switch LINE IN/MIC IN in the setting page.LINE IN x 1 (connect to an amplifier microphone) orMIC IN x 1 (connect to a microphone w/o amplifier)Audio Output Terminal 3.5 mm ( 0.14 in.) mini-jack connector (monaural)(LINE OUT) Connect via an audio interface cable (included)LINE OUT x 1 (connect to an amplifier speaker)External Device I/O Terminal Input x 2, Output x 2Memory Card SD Memory Card, SDHC Memory Card, SDXC Memory Card* 4 Compatible.Capacity: Max. approx. 32 GBFrame Rate: Max. 1 fpsOthersOperating Environment Temperature: -10°C – +50°C (+14°F – +122°F), Humidity: 5% – 85% (withoutcondensation)Temperature: -30°C – +50°C (-22°F – + 122°F), Humidity: 5% – 85%(without condensation)**Equipped with separately sold Heater Unit HU600-VBPower Supply PoE: PoE power supply via LAN connector (IEEE802.3af compliant)AC Adapter: PA-V17 (100 – 240 V AC) (sold separately)External power source: 24 V AC/12 V DCHeater Unit HU600-VB (sold separately): 24 V AC onlyPower Consumption When using PoE: Max. approx. 8.4 W Max. approx. 7.8 WMax. approx. 8.6 WWhen using AC Adapter PA-V17: Max. approx. 10.72 WMax. approx. 10.2 WMax. approx. 10.9 WWhen using DC: Max. approx. 9.0 W Max. approx. 8.3 WMax. approx. 9.0 WWhen using AC: Max. approx. 8.1 W Max. approx. 7.5 WMax. approx. 8.3 WMax. approx. 18.7 W* Max. approx. 18.9 W**when separately sold Heater Unit HU600-VB installedDimensions ( x H) 180 x 147 mm ( 7.09 x 5.79 in.)( x H) 186 x 140 mm ( 7.32 x 5.51 in.)Weight Approx. 1920 g (4.24 lb.) (camera only)Approx. 162 g (5.8 oz.) (Junction Box Mounting Kit)Approx. 1910 g (4.22 lb.) (camera only)Approx. 162 g (5.8 oz.) (Junction Box Mounting Kit)Approx. 1200 g (2.65 lb.) (camera only)Approx. 159 g (5.7 oz.) (Junction Box Mounting Kit)Approx. 1200 g (2.65 lb.) (camera only)Approx. 159 g (5.7 oz.) (Junction Box Mounting Kit)Impact Resistance External materials: aluminum alloy, Dome: polycarbonate plasticsWith lens shock absorbing mechanismEstimated shock resistant: 50J (based on Canon’s test method)Dust-resistant/ IP66-rated (IEC60529)Waterproof Specification Only applies if properly installed and adequately waterproofed*1 (W): maximum wide angle, (T): maximum telephoto*2 The frame rate may be reduced due to Viewer PC’s specs, the number of clients accessing at the same time,network loads, image quality setting, type or movement of the subject or other reasons.*3 A third-party amplifier speaker is necessary.*4 VB-H610VE/VB-H610D specific function3/4” NPT threaded hole3- 4.6 ( 0.18)(mounting screw holes)3- 4.6 ( 0.18)(mounting screw holes)140 (5.51)R62 (R2.44)12°120°120°155 ( 6.10)R62 (R2.44)147 (5.79)7.5°120°120°164 ( 6.46)Unit: mm (in.)WARNING To reduce a risk of fire or electric shock, do not expose thisproduct to rain or moisture.CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, JapanCANON EUROPA N.V.Bovenkerkerweg 59-61, P.O. Box 2262, 1185 XB Amstelveen, The NetherlandsThe contents of this guide are subject to change without any prior notice.

/ 2

Related manuals for Canon VB-M600VE

Canon HR10 Instruction Manual

Canon VIXIA HF R32 Quick Manual

Canon VB-H710F Specifications

This manual is suitable for:

VB-M600VE VB-H610D VB-H610VE VB-M600D

manualsdatabase

Your AI-powered manual search engine