Canon i900D Series Setup Instructions

Also see for 900D - i Color Inkjet Printer: Printing guide Printing guide Quick start guide Quick start guide Printing guide

Contents

start here

Canon i900D Series Setup Instructions Manual pdf 1 page image

Pinch the paper guide and slide it to theleft. Load a sheet of blank paper in thepaper rest. Slide the guide toward theleft edge of the paper.3Paper GuideUSB PortUSB CableContinue with Step 6on side two.For USB Port:Insert the ink tank into the correct slot.(Refer to the color guide on the print head holder.)Press down until the ink tank clicks into place.clickPaper Output TrayPaper RestNOTE: The printer will perform a printhead cleaning after the cover is closed.TURN THE PRINTER OFF.Connect one end of the USB cable to thecomputer, the other to the printer.IMPORTANT: Be sure the printer isoff before continuing, or the computerwill attempt to install the printerdriver before the printer is ready.Electrical ContactsPrint Head NozzlesclickTilt the print head toward you as youlower it into the holder.Remove the print head from its package.Remove the orange protective capfrom the print head nozzles.NOTE: Do not touch the electrical contactsor the print head nozzles.Lower the lock lever and press it downuntil it clicks into place.Raise the lock lever on the printer.Tear at notch to openPOWERLampPOWERButtonPlug the power cord into the back of theprinter and connect the other end to apower outlet.Open the front cover. The print head holderautomatically moves to the left. Removethe protective tape.Write down the serial number located tothe left of the print head holder. You willneed this later to register the product.Shipping TapeSerial NumberProtective TapePress the POWER button. The printerwill initialize.Remove the shipping tape from the printer.i900D SeriesPhoto PrinterCarefully remove all items from the box.Documentationand Software KitPhoto Paper TrayPeel back the orange tab and completelyremove the plastic wrapper from the MagentaInk Tank (BCI-6M).Twist off and discard the orangeprotective cap.NOTE: To avoid spilling ink, neverpress on the sides of an ink tank.Insert the remaining ink tanks into theirassigned slots, pressing down until they click.Close the front cover and extend thepaper rest and paper output tray.Protective CapPower Cordi900D Series Print HeadInk TanksBCI-6Y Yellow BCI-6M MagentaBCI-6BK Black BCI-6C CyanBCI-6PM Photo Magenta BCI-6PC Photo Cyan123451543121234512Install the Ink TanksUnpack the Printer1 2 3 4 5Prepare the Printer Install the Print Head Connect the Printerand Load PaperStart HereEasy Setup Instructionsi900D SeriesPhoto Printer

/ 2

Related manuals for Canon 900D - i Color Inkjet Printer