Cardax Prox Mifare Series Installation Note
Also see for Prox Mifare Series: Installation note
            | |
Contents | 
Installation NotePart number 3E1100 R16 1July 2010CAUTIONThis equipment contains components that can be damaged byelectrostatic discharge. Ensure both you and the equipment areearthed before beginning any servicing.Before you BeginUnpack the Prox Mifare Series (Teardrop) reader and check the shipmentcontains the following items:• 1 x Prox Mifare Series (Teardrop) reader base• 1 x Prox Mifare Series (Teardrop) reader facia• 1 x printed circuit board (PCB) assembly• 1 x cable assembly• 1 x M3 Torx Post Security screw• 4 x self tapper pozi counter sunk fixing screws (two different lengths)WARNING: You must use the screws provided, as using other types ofscrews could interfere with the electronics. (See the “Mounting” sectionlater for further explanation.)FirmwareVersion vMT3.07 (or later) of the Prox Mifare Series (Teardrop) readerfirmware code supports the Mifare Enhanced Security feature. This featureprovides a method of ensuring that readers reading Mifare cards are able toprevent access through the use of replicated cards, and is optional forcustomers, (i.e. customers can choose whether to use this enhanced securityand which doors to apply it to).The Mifare Enhanced Security feature is only supported when the reader isconnected to a Cardax FT Controller 3000 or a Cardax FT GBUS UniversalReader Interface.Prox Mifare Series (Teardrop) |
Related manuals for Cardax Prox Mifare Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine