Cardinal PL-HLKIT Assembly Instructions Manual
ASSEMBLY INSTRUCTIONS FOR PL-HLKITUNPACKINGOpen package containing PL-HLKIT. You should have the following components:ITEM PART NO. DESCRIPTION QTYA 0046-B502-08 Stainless Steel Connecting Link 2B 6013-0058 Stainless Steel 5/16-18 Elastic Stop Nut 2C 6021-1234 Stainless Steel Socket-Head Shoulder Bolt 2D 0046-B504-08 Stainless Steel Spacer 2PREPARATIONThe following tools are required to assemble the PL-HLKIT:• 3/16 Allen wrench• 1/2" open end, or box end, or combination wrenchASSEMBLYReferring to the figure below:1. Attach the Connecting Links (A) to the PLXXX scale (Load Cell) using the Socket-HeadShoulder Bolt (C), 2 Spacers (D) (1 on each side of the Load Cell) and 5/16-18 ElasticNut (B). Securely tighten using the 3/16 Allen wrench and 1/2 wrench.2. Place the Yoke Pin into the Connecting Links (A) and then secure the Yoke Pin to theConnecting Links (A) with the remaining Socket-Head Shoulder Bolt (C) and 5/16-18Elastic Nut (B). Securely tighten using the 3/16 Allen wrench and 1/2 wrench.0046-M503-O1 Rev C12/04A CDDABLink(Not furnished with PL-HLKIT)Load Cell(Not furnished with PL-HLKIT)Yoke Pin(Not furnished with PL-HLKIT)PLXXX Scale(Not furnished with PL-HLKIT) |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine