Carlin EZGas Pro Instruction Manual

Also see for EZGas Pro: Instruction manual

Contents

Carlin EZGas Pro Instruction Manual Manual pdf 1 page image

ContentsPLEASE read this first ......................................... 2Codes and standards .......................................... 2EZGas Pro burner at-a-glance ............................ 3Prepare site • prepare burner • mount burner ..... 4Install gas piping .................................................. 9Wire burner ........................................................ 10Check system • start-up burner/appliance ......... 11Perform checkout procedure • fill out certificate 14Maintenance and service procedures................ 15Troubleshooting ................................................. 17Dimensions and mounting information .............. 19Replacement parts ............................................ 20Instruction manualRatingsInput: .................................. 50,000 to 275,000 BtuhFuels: ............................Natural gas or propane gasMax. supply pressure ...............14 inches w.c.Min. supply pressure ..................5 inches w.c.Manifold pressure ...................3.5 inches w.c.Electrical: Power ............................ 120V/60 Hz/1-PhaseMotor .............1/15, 1/7, or 1/6 HP, 3450 RPMCurrent .............. Approx. 2.0, 2.5 or 2.3 ampsIgnition: ............ Carlin Model 41800 solid state ignitorControl: Carlin Model 60200FR microprocessor controlAgencies: ....UL Listed (US and Canada)Installer/servicer — Except where specifically statedotherwise, this manual must be used only by a qualifiedservice technician. (In the state of Massachusetts, thisproduct must be installed by a licensed Plumber or GasFitter.) Failure to comply with this or other requirements inthis manual could result in severe personal injury, deathor substantial property damage.User — Refer only to User’s Information manual for in-formation regarding operation of this burner. The burnerInstruction Manual is intended only for your service techni-cian. The burner and heat exchanger must be inspectedand started at least annually by your service technician.70 Maple Street East Longmeadow, MA 01028Ph 413-525-7700 Fx 413-525-8306Carlin Combustion Technology, Inc.Tech support 800-989-2275 carlincombustion.com© Copyright 2013 — Carlin Combustion Technology, Inc.LISTED™Pro