MX SeriesMX 400 DRAW LATCH KIT INSTALL GUIDELEVEL 4Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com91637REVA1. Locate two indentations on right side of cabinet shown. Open cabinet, move cables aside anddrill two 0.188" dia. holes through cabinet wall using indentations to locate drill bit. Removemetal shavings.2. Remove and dispose of four screws and existing latch from door standoffs on inside of door.

Carmanah MX Series Install Manual