Carrier EDGE Pro 33CS2PPRH-03 Owner's Manual

Also see for EDGE Pro 33CS: Owner's manual Owner's manual Owner's manual

Carrier EDGE Pro 33CS2PPRH-03 Owner's Manual Manual pdf 1 page image

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.Catalog No. 04-53330031-01 Printed in U.S.A. Form 33CS-26SO Pg 1 6-13 Replaces: 33CS-21SOOwner’s ManualPart Numbers 33CS2PPRH-03 and 33CS2PP2S-03SAFETY CONSIDERATIONSRead and follow manufacturer instructions carefully. Fol-low all local electrical codes during installation. All wiringmust conform to local and national electrical codes. Improperwiring or installation may damage thermostat.Recognize safety information. This is the safety alert sym-bol . When the safety alert symbol is present on equipmentor in the instruction manual, be alert to the potential for person-al injury.Understand the signal words DANGER, WARNING, andCAUTION. These words are used with the safety alert symbol.DANGER identifies the most serious hazards which will resultin severe personal injury or death. WARNING signifies a haz-ard which could result in personal injury or death. CAUTIONis used to identify unsafe practices which would result in minorpersonal injury or property damage.GENERALThe Edge Pro thermostat by Carrier is a wall-mounted, low-voltage control which combines temperature and humiditycontrol in either a single or two-piece unit. The Edge Pro ther-mostat can be set for 7-day, 5/2-day, or 1-day programmableoperation. Different heating and cooling set points and timesare programmable for 2 or 4 periods per day. The thermostatcan also be configured for non-programmable operation. Whenoperating as a non-programmable thermostat, the user will stillhave both temperature and humidity control.The Edge Pro thermostat has no need for batteries to storeuser-configured settings in memory. During power loss its in-ternal memory saves settings for unlimited time, and the clockcontinues to run for at least 24 hours. An extension of Carrier’sproven line of thermostats, the Edge Pro thermostat providesseparate set points for heating and cooling in addition to hu-midification and dehumidification.OPERATIONThermostat Display — The thermostat display is locat-ed in the center of the thermostat. See Fig. 1. The followinginformation can be displayed on the screen:• day of the week• filter and UV lamp service reminders• current temperature• current program routine (follow scheduled program-ming, hold current settings, or run holiday program)• fan mode (on, auto)• current system mode (heating, cooling, emergency heat,heat/cool (auto), off)• humidify or dehumidify settings• Fahrenheit or Celsius display• advanced programming indicators• keypad locked or unlocked• programming option (indicates which settings are beingadjusted)• system is in auxiliary (supplemental) mode• cooling set point• heating set point• year• holiday schedule return date• day• length of time for temporary temperature hold (override)• month• outdoor temperature• leaving air temperature• time period start• period of the dayThermostat Front Panel Buttons — The thermo-stat has buttons under the front cover which are used for vari-ous functions such as raising or lowering the desired set pointand changing the current mode. See Fig. 2.SET BUTTON — This button enters the thermostat program-ming schedule and allows the user to adjust the clock andchange the calendar.SCHEDULE BUTTON — This button allows the user tochoose to follow a schedule, hold the current set points, or gointo holiday mode.OCCUPIED BUTTON — This button temporarily changesthe thermostat from Unoccupied to Occupied settings.holidayholidayoccunoccocc3occ2 aFig. 1 — Thermostat Displaya33-9188EDGE ® Pro33CSCommercial ThermostatDownloaded from ManualsNet.com search engine