Carrier FV4C Installation Manual

Also see for FV4C: Installation instructions

Carrier FV4C Installation Manual Manual pdf 1 page image

FV4C002, 003, 005, 006Installation InstructionsFan Coil for Puronr RefrigerantA02332Fig. 1 -- Model FV4CNOTE: Read the entire instruction manual before starting theinstallation.SAFETY CONSIDERATIONSImproper installation, adjustment, alteration, service, maintenance,or use can cause explosion, fire, electrical shock, or otherconditions which may cause death, personal injury or propertydamage. Consult a qualified installer, service agency, or yourdistributor or branch for information or assistance. The qualifiedinstaller or agency must use factory--authorized kits or accessorieswhen modifying this product. Refer to the individual instructionspackaged with the kits or accessories when installing.Follow all safety codes. Wear safety glasses, protective clothing,and work gloves. Use quenching cloth for brazing operations.Have fire extinguisher available. Read these instructionsthoroughly and follow all warning or cautions included in literatureand attached to the unit. Consult local building codes and thecurrent editions of the National Electrical Code (NEC) NFPA 70.In Canada, refer to the current editions of the Canadian ElectricalCode CSA C22.1.Recognize safety information. When you see this symbol onthe unit and in instructions or manuals, be alert to the potential forpersonal injury. Understand the signal words DANGER,WARNING, CAUTION, and NOTE. These words are used withthe safety--alert symbol. DANGER identifies the most serioushazards which will result in severe personal injury or death.WARNING signifies hazards which could result in personal injuryor death. CAUTION is used to identify unsafe practices whichmay result in minor personal injury or product and propertydamage. NOTE is used to highlight suggestions which will resultin enhanced installation, reliability, or operation.ELECTRICAL SHOCK HAZARDFailure to follow this warning could result in personal injuryor death.Before installing or servicing system, always turn off mainpower to system. There may be more than one disconnectswitch. Tag disconnect switch with a suitable warning label.Turn off accessory heater power if applicable.! WARNINGCUT HAZARDFailure to follow this caution may result in personal injury.Sheet metal parts may have sharp edges or burrs. Use care andwear appropriate protective clothing and gloves whenhandling parts.CAUTION!