For more information, contact your local Carrier Controls Expert©2023 Carrier. All Rights Reserved. Cat. No. 11-808-959-01INTRODUCTIONHyperStat is a wall-mount thermostat. Its thoughtful design ensures that it blends into mostcommercial spaces while still giving a fresh and contemporary feel compared to datedbuilding control interfaces.PACKAGE CONTENTS• HyperStat device• Mounting accessoriesSPECIFICATIONSPower Power Source: 24V AC/DC input (+/- 15%)Peak consumption: 1.4VA MaximumOperating range Temperature 32 to 122°F (0°C to 50°C)Humidity 20-85% non-condensing.Communication Sensor bus for daisy chained sensor communication and low power 3V dc.4-wire interface for RS 485 communication @ 115200 baud and 5VDC, 100mA power source900-928 MHz Mesh IEEE 802.15.4-compliant, for communications to CCUBluetooth: BLE 4.1 for commissioning, and communication to wireless sensorsOnboard Sensors Temperature range of 32 to 122°F with an accuracy of +/-1°FHumidity 0 to 100% with an accuracy of 2%CO2 sensor with a range of 0 - 40,000 ppm, accuracy of +/-30ppmVOC sensor; Typical Accuracy: 15% of measured value; TVOC: 0 - 60,000ppb;Occupancy sensor based on passive infrared (PIR) with a detection range of4m with a 15-degree angleLight Sensor. Ambient light sensor • <100 LUX resolution • High-accuracy UVindex sensor • Matches erythermal curveSound sensor with 40-120dB response for 100Hz to 10KHzPM2.5, PM10 sensor (optional). Detection range of 0-1000μg/m3 and accuracyof +/-10μg/m3 (PM2.5, 0-100μg/m3) or +/-25μg/m3 (PM10, 0-100μg/m3). Maximum long-term mass concentration precision limit drift:• 0 to 100 μg/m3 ±1.25 μg/m3/year• 100 to 1000 μg/m3 ±1.25 % mV/yearInputs 2 x 10K Type-2 thermistor inputs with 2% accuracy2 x 0-10V Analog voltage inputs with 2% detection accuracy (2-10V)Touch slider for temperature control along with 3 mechanical buttonsHYPERSTAT (7C-HS-C2W-X)INSTALLATION GUIDEScan this QRcode to get amore detailedversion of theInstallationGuide