ET8 7 5 4 6 3 2 1 SabPAssembly instructionCAI 1010AttentionThe indoor stations have to be (de-)installed only voltage-free!The table rack is pre-configured and has to be connected to a RJ45 socket. Therefore, please note the connection diagram under “cableassignment“!Cable assignment Cable is already pre-installed.wires connect toplug PIN no. connection terminal2 orange a3 green/white b4 blue E5 blue/white P(1) adapter plate(2) lock pins (4x)(3) connecting cable (2.5 m)(4) knurled screws(5) grub screw / hexagonal socket(2)(4)(3)(1)(5)Set up the table rackTurn the table rack into the desired position and fix the position by tightening the knurled screws by hand.Connection terminal UAE socket with 8 pinsmax. 60°

Carus CAI 1010 Assembly Instruction Manual