Connect 6 poles vertically into the connectors on the base. Thenattach the remaining connectors into the top of the poles the sameway as the step before.Part ListSecure the net to the frame by using the included cable ties. For added security, use the supplied steel pegs to secure theenclosure into the ground.Ensure there are no gaps large enough for your cat to escape. 6Slip the net over the frame. Make sure to pull the net down to the base slowlyadjusting each corner as you go.5Connect the remaining aluminium poles to complete the main frame. 43Attatch the aluminium poles to the 3-way connectors creating thecorners of the frame. Use the 4-way connectors to connect themiddle of the frame.2120x Aluminium Poles1x Enclosure Cat Netting100x Cable Ties4x 4-Way Connectors8x 3-Way Connectors6x Steel PegsLite Double 2.3mPortable Cat EnclosurePreperationCheck that you have all the required parts.Make sure to install the enclosure on alevel ground surface.Make sure to lock in all connectors securely.NOTE: Ensure the zipper is on the left of the long side of the enclosure,facing you so that the net doesn’t become twisted once attached.1x Carabiner