DAE CC2030 Installation Manual
  |
CC2030-v3.0 installation guide-1.2us_P1CC203002:81:AO:26:112019 S 22000432S/N :H/W :F/W :H1.0.1A01CC20303.0MAC :DangerTo prevent the risk of electric shock, turnoff all sources of electrical power to thedevice during installation or wiring.Warnings●Install only by a qualified and trained personnel.●Follow these instructions accordingly,otherwise damage may occur to the device.●Follow electrical rules and regulations inthe selection of wire materials and gauges.●Avoid having oil, water, metallic powder orother foreign substances enter the device.●Avoid using the device in environmentswhere it will be exposed to steam, corrosive,or flammable substances; which can causeshort circuits, fires, or explosions. C C 2 0 3 0Cloud Metering GatewayInstallation Guide 1 Warnings & Precautions 4 Installation 2 Description 3 DimensionPowerSupplyDC12-24VA1FEthernet USBA2CC203002:81:AO:26:112019 S 22000432S/N :H/W :F/W :H1.0.1A01CC20303.0MAC :CC203002:81:AO:26:112019 S 22000432S/N :H/W :F/W :H1.0.1A01CC20303.0MAC :RXRS485-2+ − + −RS485-12 1+ −DC12-24VPowerTXRXTXReservedReservedA1FEthernet USBA2ReservedReservedEthernet PortStatus LEDsPower InputMeter CommunicationStatus IndicatorsRS485 to metersFront Side Unit : mm65351309.535mmDIN RailTS35/7.5 or 151.Hook onto the DIN rail2.Push towards the wall1. View3. Wiring2. Mounting1. CC2030 : The gateway for DAE CloudMetering-Water,Electricty2. DAE Server : meter.iotems.netPowerSupplyDC12-24V + -+ −DC12-24VCord end terminalRecommendedInput Power1.Use the wire size and type as directed by electricalregulations2.Make sure that the wire and terminal are makinggood contact and tightly screwed.3.Terminal may only accept wire sizes up to 12 AWG4.Make sure that the polarity is correct.Cord end terminalrecommendedCommunication Cable1.Shielded twisted pair UL2464 cable,24 AWG recommended.2.Wire ends should be terminated with eithera cord end terminal or blade terminal.3.Make certain that the wire is screwed securelyto the terminal.4.Check that the positive (+) and negative(–) terminals are properly connected.Wiring Detail：Red (+) White (–)V3.0 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine