MOUNTING INSTRUCTIONSBaby Changing Mat 3236/3237for DAN DRYER Baby Changing StationsIntroduction:This document serves to provide guidelines for use of the DAN DRYERBaby Changing Mat 3236/3237.The changing mat is fixed to the changing surface after the babychanging station has been attached to the wall.Warning:For best results follow instructions carefully.1. Unpack the mat. Make sure four velcro pads with a protective layer are attached onto the back of themat.Do not remove the protective layer at this stage.2. Clean the surface of the baby changing station to remove any dirt and grease. We recommenddenatured alcohol. Do not use anything else, it might damage the surface.3. Remove the protecting paper from the 4 velcro pads.4. Place the mat on the changing surface, with the velcro pads pointing downwards. Be careful toposition the mat symmetrical.

DAN DRYER 3236 Mounting Instructions