DAPAudio SC-WP1 D1541 User Manual
  |
11. Safety Instructions2. Before Using the ProductImportantRead and follow the instructions in this user manualbefore installing, operating or servicing this product.If the device fails to work correctly, discontinue the use immedi-ately.If the device is exposed to extreme temperature variations (e.g.after transportation), do not switch it on immediately. Let thedevice reach room temperature before switching it on, otherwi-se it may be damaged by the formed condensation.AttentionGeneral safetyDo not shake the device. Avoid brute force when using thedevice.SC-WP1 Wall Panel3. DescriptionUser ManualD1541 - BlackFor adult use only. The device must be installed beyond the reachof children.AttentionThis device shall be used only for the purposes it isdesigned for.This device is designed to be used as a wall remote control panel.Any incorrect use may lead to hazardous situations and result ininjuries and material damage.This device does not contain user-serviceable parts. Unauthorizedmodications to the device will render the warranty void. Suchmodications may result in injuries and material damage.AttentionDo not expose the device to conditions that exceed therated IP class conditions.This device is IP20 rated. IP (Ingress Protection) 20 class providesprotection against solid objects greater than 12 mm, such as ng-ers, and no protection against harmful ingress of water.D1542 - WhiteDANGERDanger for childrenDo not leave various parts of the packaging (plastic bags, poly-styrene foam, nails, etc.) within children's reach. Packagingmaterial is a potential source of danger for children.After unpacking, check the contents of the box. If any parts aremissing, contact your Highlite International dealer.Your shipment includes:Wall panel (A)2 x Front plates (C)Turn knob (D)2 x Long screws (E)2 x Short screws (F)User manualWall-box mounting frame (B)D1541 – SC-WP1 Wall Panel – BlackD1542 – SC-WP1 Wall Panel – WhiteThe DAP SC-WP1 is a wall-mounted remote control panel for theDAP SC-5.2 Source Control (D1540).For complete product specications visit the respective productpage on our website www.highlite.com.The SC-WP1 is available in black and white:4. SetupThis gure shows a typical setup with the SC-5.2 Source Control(D1540), 5 sources, a wall panel (D1541/D1542), and an outputdevice (active loudspeaker).Highlite International B.V. - Vestastraat 2NL-6468 EX, Kerkrade, The Netherlands1ON 2 3Source 1 Source 2Source 3Source 4Source 5(Local)D1541 / D1542Active loudspeakerD154001) 8 volume LED indicators (green)02) Volume control03) Line/phone connector IN (3,5 mm jack)04) Line/phone selection button05) IR sensor06) 5 source selection buttons: Sources 1–4 and Local07) 5 LED indicators : Sources 1–4 and Local(amber)Front View123476508) DIP switch (no function)09) 2 RJ45 connectorsBack View89ABDE FC C |
Related manuals for DAPAudio SC-WP1 D1541
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine