DBI SALA 1106150 User Instruction Manual

DBI SALA 1106150 User Instruction Manual Manual pdf 1 page image

© Copyright 2007, DB Industries, Inc.User InstrUctIon ManUalrebar lanyards for Work PosItIonIngThis manual is intended to meet the Manufacturer’s Instructions as recommended by OSHA andshould be used as part of an employee training program.Figure 1 - Rebar Lanyards for Work PositioningWarnIng: This product is part of a work positioning system. These instructions must be provided to the userand the rescuer (see section 8 Termonology). The user must read and understand these instructions beforeusing this equipment. The user must follow the manufacturer’s instructions for each component of the system.Manufacturer’s instructions must be followed for proper use and maintenance of this equipment. Alterations ormisuse of this equipment, or failure to follow instructions, may result in serious injury or death.IMPortant: If you have questions on the use, care, or suitability of this equipment for your application,contact DBI‑SALA.IMPortant: Before using this equipment, record the product identification information from the ID label intothe inspection and maintenance log in section 9.0 of this manual.Instructions for the following series products:Rebar Lanyards for Work Positioning(See back page for specific model numbers.)Lanyard LegsLabelsLanyard LegsLeg Connector:Snap HooksConnect toHarness or BeltCenter Connector:Snap Hook orCarabinerConnects to AnchorLeg Connector:Snap HooksConnect toHarness or BeltCenter Connector:Snap HookConnects to AnchorLabels