DC Med IFU-1701 Instructions For Use Manual
NIV Face MaskInstructions for use:This product is used in non-invasive positive pressure ventilation (NIPPV) treatmentof patients. Is used to connect the breathing apparatus and patient-side interfacedevice, with a variety of applicable conditions, and effective to achieve highefficiency of respiratory support. Usage: Inspect the packaging and product appearance before using. Please do not use ifthere are any worn or damaged parts. Remove the mask set and L-fitting from the box and snap the L-fitting into themask body. See headgear assembly diagram, hook headgear point A to the connecting ringson both sides. Connect the headgear point B hook and loop. Hold the mask over nose and mouth, and then position the headgear. Fasten headgear Quick release buckle connection of both sides to the maskquick release buckle connection column. Adjust the head straps and the hook and loop of the mask comfortably. L-type connector side ISO 4.3mmOD hole for measurement monitoring use. After wearing, connect the ventilator tubing connector to the ISO 22mm ID foruse. Quick release buckle on both sides can be easily removed. It can also beconnected comfortably.Headgearconnecting ringQuick release buckleconnection columnISO 22mmIDconnectorISO 4.3mmODMeasurement hole & CAPSilicone maskL-type connectorMask bodyHeadgear Assembly DiagramQuick release buckleHeadgearA AB BProduct Parts |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine