DCbox DC5-A Manual
  |
ZENTDC5-AP1MANUALFRONT PANEL & KEY FUNCTIONS1. Press this key to enable the reset function & reset indicator (Z) is light; press this key again todisable the reset function & reset indicator (Z) is dark.Enter Key &Save Key1. In the measuring status, press this key can enter to parameter pages.2. In the parameter setting, press this key can save the value & go to next parameter.Reset KeyShift Key 1. In the parameter setting , press this key can move the cursor left.Down Key & DisplayZero Adjusting KeyUp Key & DisplaySpan Adjusting Key1.In the measuring status, press this key for 3 sec can enter to display value adjustment of "SPAN"2. In the parameter setting, press this key can increase the digits.2. In the parameter setting , press this key can decrease the digits.DescriptionsDisplay DefaultPower On Display: SPAN AdjustmentDisplay: ZERO AdjustmentPS: To use this function to adjust the real zero value.Press to select adjusting speed rate, press to modify the zero value.PS: To use this function to adjust the real span value.Press to select adjusting speed rate, press to modify the span value.Display (dZEro)Adjustment (dZEro)Displ ay SpanAdjust ment (dSPAn)Block ChartsPress ENTPress ENTPress for 3 secPress for 3 secPresent value for measurement.Measuring Status Present value for measurement.DescriptionsSymbolKey NameMeasuring Status**1. The following block charts are parameters codes, parameter codes & parameters will alternate flashingif the parameters can be modified.2. To modify the parameters, please press , and press ENT to save the parameters after the modification.3. Please don't forget the new pass code after modification.1.In the measuring status, press this key for 3 sec can enter to display value adjustment of "ZERO"GENERAL MODE OPERATING PROCEDURES5 DIGITAL MICRO-PROCESS METER4. In any pages, press & , or don't press any keys for 2 minutes that will back to measuring status.ALALALALDPlease understand key indicators & functions at the first operation.Reset KeyEnter Key &Save KeyShift KeyUp Key & DisplaySpan Adjusting KeyDown Key & DisplayZero Adjusting KeyNone Reset IndicatorMax. Hold IndicatorData Hold IndicatorDisplay 1 IndicatorDisplay 2 IndicatorRoot Indicator Expand FunctionAL1AL3AL4AL2AZHDDIOMAXAZ |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine