DELTA DORE TYBOX 610 User Manual

Also see for TYBOX 610: Installation guide

DELTA DORE TYBOX 610 User Manual Manual pdf 1 page image

PROGAUTOTYBOX0h 2 4 6 8 10 12 14 16 18 20 22 241234567iPROGAUTO0h 2 4 6 8 10 12 14 16 18 20 22 24TYBOX 610Weekly programmable thermostatUser guideThis appliance is compliant with the requirements ofdirectives 2004/108/EC (Electromagnetic Compatibility)and 2006/95/EC (Low-Voltage Safety)Because of changes in standards and equipment, the characteristics given in the text and the illustrations provided in thisdocument are not binding unless expressly confirmed*2702304_Rev.3*1 2 31 2 31 - DescriptionThermostat Selector dialInformationbuttonSelector dialModificationbuttons (functiondependent)Manual modeShutdownSet-pointtemperature setting Configuration modeTime settingProgrammingAutomatic mode2 - Time settingTurn the selector dial to the position marked .The day numbers flash.• Press + or - to set the day, then OK to confirm andgo to the next setting.Repeat these steps to set the hours and minutes.To exit the “time setting” mode, turn the selector dial.DaysHours Minutes(1: Monday… 7: Sunday)3 - Set-point temperature settingTurn the selector dial toThis mode is used to select the setback andcomfort set-point temperatures.Note:Only the setback set-point temperaturewill be available to you if you have optedfor the comfort setting for every radiator(menu CF03) of the “installation guide”.• Press + or - to set the comfort temperature,then confirm with OK to move to the nextsetting for the setback temperature.Confirm again with OK.The set-point temperatures are adjustablefrom 5 to 30°C in heating mode and from18 to 35°C in cooling mode in steps of0.5°C. To set the cooling set-point tempe-ratures, switch the thermostat to coolingmode (refer to the heating / cooling modechange menu).Setting the comforttemperatureConfirmationSetting the setbacktemperatureConfirmation4 - Programming• Create your programmeProgramming starts on day 1 at midnight. Press the or buttonsto create different Setback or Comfort periods (in 1/2 hour intervals).There are 2 possibilities for confirmingyour programme:• Confirm and copy the programmeto the next dayHold down the OK button for 3 seconds toconfirm and copy the programme you justcreated to the next day.• Confirm the programmePress the OK button to confirm and go toprogramming for the next day.Turn the selector dial to the position markedThe default programme is a Comfort period from 6.00am to 11.00pm.The return key is used to modify a programme by returning to a specific time slotOR1st time slotSet one 1/2 hourperiod in setback modeSet one 1/2 hourperiod in comfort modeDaysReturnbutton Confirmationbutton6h30 8h30 0h0h 17h30 23hExample: Comfort from 6.30am to8.30 am and 5.30 pm to 11.00 pmPress up to 06:30Press up to 17:30Press up to 00:00Press up to 08:30Press up to 23:00Copy and confirm,or confirm5 - Automatic modeTurn the selector dial to the position marked . Your thermostat will function accordingto the programme.NOTE:By default, your unit will continuously display the set-point temperature. If you want to modify thisparameter, please refer to the CF02 menu of the “installation guide”, or contact your installer.Current dayTimeInformationbuttonRequest forheat or coldRoomtemperatureCurrentmodeCurrent dayprogrammingAbsencebuttonTimermode button6 - Timer modeThis mode is used to choose a particularmode for a given amount of time.In AUTO mode, press on the button• Press + or - to set the duration that youwant (between 30 minutes and 72 hours),then on OK to confirm.Example: Timer mode for 30 minutes.• Press + or - to set the set-point temperaturethat you want (from 5 to 30°C for heatingmode and from 18 to 35°C for coolingmode), then on OK to confirm and start thecountdown.Duration of timer modeCancelCancel Temperaturesetting Set-pointtemperatureadjustmentConfirmand begincountdownSetting the duration ConfirmationPress on OK during Timer mode to modifythe settings.To cancel the current Timer mode,press on the buttonReturn to AUTO mode at the end of the countdown• Carefully read these instructions prior to installation.• Do not attempt to repair the unit yourself; an after-sales service is available.

/ 2

Related manuals for DELTA DORE TYBOX 610