DELTA Temp BREEZER MACH 4 Quick Manual
  |
QUICK GUIDEBREEZER MACH 4 - ADIABATIC COOLERDelta-Temp BelgiumLange Ambachtstraat 13, 9860 OosterzeleT: +32 (0)9 362 74 87E : info@delta-temp.comwww.delta-temp.beDelta-Temp GermanyCarl-Still-Straße 19, 45659 RecklinghausenT: +49 800 4048120E : info-de@delta-temp.comwww.delta-temp.de1. Mounting the fan head:• Lock each of the rear wheels by pressing downon the brakes.• Open the lid latch by first pulling forward thelower portion of the latch.• Remove tank lid by first lifting up on thetransport handle and then pulling forward.2. Adding water to the water tank:• Do not fill the water tank above the max filllevel, as shown. If water tank is filled past thislevel, water may leak out of the water tank andcause a hazard around the Breezer.• The water valve can be adjusted for optimalperformance according to your climate.• Lift the fan head straight up and align it withthe fan head support pole. Once the fan head isseated on the support pole, rotate the fan headhorizontally until you feel it engage with thesupport pole.• Once installed, the atomizer (metal disk) willbe facing the water tank, air will be blown overthe water tank when the Breezer is turned on.3. Routing power and water lines and replacetank lid:• Route the fan head power cord, atomizerdrain hose, and water inlet hose throughthe openings in the back of the water tank asshown above.• Slide the lid tab into the corresponding watertank notch in the back of the water tank.• Lower the front of the tank lid onto the watertank and re-lock lid latch.I. SETUP>> |
Related manuals for DELTA Temp BREEZER MACH 4
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine