DEMA 607DM-BM Installation Instructions Manual

Contents

installation instructions

DEMA 607DM-BM Installation Instructions Manual Manual pdf 1 page image

DEMA MODEL 607DM-BMDRUM MOUNT HIGH-FLOW FILL STATIONINSTALLATION INSTRUCTIONSI-644 Pg. 1 of 2Rev. B 02/01I. PARTS:A. Fill Station AssemblyB. 1 pc. Priming ringC. 1 pc. Outlet Tubing, 12’ longD. 1 pc. Small tubing clampE. 1 pc. Large tubing clampF. Metering Tip KitG. 1 pc. ea. Tubing with foot valve, ceramic weightII. CHEMICAL ADJUSTMENT:CAUTION: Be careful when working with hazardous chemicals.Select metering tip using Table 1 as a guide. Screw tip into inlet barb of injector.III. INSTALLATION:CAUTION: All work done should adhere to all applicable plumbing codes.1. Slip ceramic weight over small diameter tubing. Attach tubing to inlet barb under bung cap and secure with small clamp.2. Insert tubing into chemical and screw bung cap into drum opening.3. Slip outlet tubing (large diameter) over threads of injector. Secure with large tubing clamp and cut to convenient length.4. Attach water supply hose (not provided) to water inlet and tighten.Table 1Induction readings taken at 11 GPM and 40 psi.1 cps 75 cps 200 cpsTip ColorOz./Gal. Ratio Oz./Gal. Ratio Oz./Gal. RatioTurquoise 1.46 87.91 1.13 113.00 1.07 119.57Black 1.86 68.78 1.28 99.82 1.31 97.62Gray 2.20 58.31 1.73 73.83 1.70 75.38Red 2.94 43.50 2.38 53.67 1.97 64.98Blue 3.39 37.76 2.82 45.37 2.21 57.94Brown 4.36 29.39 3.77 33.94 2.83 45.25White 5.63 22.74 4.73 27.08 3.16 40.56Orange 7.03 18.20 5.45 23.47 3.44 37.19Clear 12.76 10.03 - - - -No Tip 21.88 5.85 9.93 12.89 4.46 28.67RETURNS: NO MERCHANDISE MAY BE RETURNED FOR CREDIT WITHOUT DEMA’S WRITTENPERMISSION. RETURN MERCHANDISE AUTHORIZATION NUMBER REQUIRED INADVANCE OF RETURN.WARRANTY: DEMA products are warranted against defective material and workmanship under normal use and servicefor one year from the date of manufacture. This limited warranty does not apply to any products whichhave a normal life shorter than one year or failure and damage caused by chemicals, corrosion, impropervoltage supply, physical abuse, or misapplication. Rubber and synthetic rubber parts such as “o”- rings,diaphragms, squeeze tubing and gaskets are considered expendable and are not covered under warranty.This warranty is extended only to the original buyer of DEMA products. If products are altered orrepaired without prior approval of DEMA, this warranty will be void.Defective units or parts should be returned to the factory with transportation prepaid. If inspection showsthem to be defective, they will be repaired or replaced without charge, F.O.B. factory. DEMA assumes noliability for damages. Return merchandise authorization number, to return units for repair orreplacement, must be granted in advance of return.

/ 2

Related manuals for DEMA 607DM-BM