Teileliste und NaeheinrichtungenSpare Parts List and Sewing Equipment275Ausgabe / Edition: 09/2004 Printed in Federal Republic of Germany Teile-Nr./Part.-No.: 0791 275801Postfach 17 03 51, D-33703 Bielefeld • Potsdamer Straße 190, D-33719 BielefeldTelefon +49 (0) 5 21/ 9 25-00 • Telefax +49 (0) 5 21/ 9 25 24 35 • www.duerkopp-adler.com

DURKOPP ADLER 275 Spare Parts

275 Series

instruction manual

general safety instructions

Product description

Subclasses

Accessories

Technical data

Threading the needle thread

Winding on the bobbin thread

Fitting the hook thread bobbin

Setting the hook thread tension

Setting the thread regulator

Setting the sewing-foot pressure

Setting the stitch length

Raising the sewing foot

Setting the value of the overfeed (fullness)

Automatically switching on the edge cutter with the first stitch

Switching on the edge cutter with an automatic delay

Operating terminal - description of the operating components

Switching the machine on

Sewing with fullness

Sequence advance by severing the thread

Keypad on the machine arm

Sewing

sewing operation

maintenance work

Lubrication

About these instructions

Representation conventions – symbols and characters

Liability

Safety

Signal words and symbols used in warnings

Machine description

Proper use

Declaration of Conformity

Operation

Switching on and off the machine

Inserting or changing the needle

Winding the hook thread

Changing the bobbin

Thread tension

Setting the needle thread tension

Setting the needle thread regulator

Upper transport (Multiple width)

Setting the second upper transport length (optional)

Limiting the upper transport length

Sewing foot

Setting the downforce pressure for the upper transport foot

Lifting the sewing foot

Locking the sewing foot

Edge cutter

Setting the edge cutter with a DAC mini

Enabling the edge cutter with a DAC mini

Programming

Smooth sewing

Sewing with multiple widths

Changing between smooth sewing and a single multiple width

Alternately sewing left and right parts with programmed multiple widths

Switching on or off the edge cutter

Creating and changing a program

DAC basic/classic

Maintenance

Cleaning

Lubricating

Lubricating the machine head

Lubricating the hook

Servicing the pneumatic system

Draining the water condensation

Cleaning the filter element

Parts list

Setup

Assembling the stand

Tabletop

Assembling the tabletop to the stand

Assembling the reel stand

Setting the working height

Assembling the pedal and the setpoint device

Machines with DAC mini

Inserting the machine head

Assembling the control

Assembling the knee switch

Electrical connection

Creating the equipotential bonding

Checking the needle positions

Setting the DAC mini multiple width control

Checking the rotation to the reference position

Pneumatic connection

Assembling the compressed air maintenance unit

Setting the operating pressure

Performing a test run

Decommissioning

Disposal

Troubleshooting

Errors in sewing process

Technical Data

Requirements for trouble-free operation

Appendix