6400 SYCAMORE CANYON BLVD.RIVERSIDE, CALIFORNIA 92507855-680-9595WWW.DV8OFFROAD.COMPRODUCTINSTALLATION MANUALMOLLE CENTER CONSOLE AND BRIDGE03-09 LEXUS GX470CCGX-01TOOLS REQUIRED SKILL LEVEL TIME REQUIRED- 4mm Allen Bit- 11/32” Drill Bit- 10, 12mm Wrench (For Nutsert Tool)Before you install this kit — Read and understand allinstructions, warnings, cautions, and notes contained inthis installation instruction guide. Consult your vehicleowner’s manual for proper disconnection of electrical andlifting of vehicle if required for installation of this product.This install may require some technical skills andknowledge of basic mechanical work. If you do not feel thatyou are capable of performing this install please take thisproduct to a trained professional.After reading this guide please contact us with anyquestions or concerns before installing product.Customer Service: 855-680-9595DV8 Offroad is not responsible for any bodily injury or harm to youor your vehicle as a result of an improper install.Proper installation of this kit required knowledge of the factoryrecommended procedures for removal and installation of originalequipment components. We recommend that the factory shop manualand any special tools needed to service your vehicle be on hand duringthe installation. Installation of this kit without proper knowledge of thefactory recommended procedures may affect the performance of thesecomponents and the safety of the vehicle• Always wear eye protection when operating power toolsInspect all contents of this package to make sure product is not damagedand all installation hardware has been included. If parts are missing fromkit, please be prepared to provide the following information1. Name of purchase location2. Bar Code on side of box3. Date above bar code4. Date inside box cover- Novice/Intermediate- 1 (you) to 2 personsLittle skill level required, you caninstall it by yourself, however,assistance is highly recommendedto ensure proper fitment.- 1.5 HourTime to install this should onlytake about an hour and half.WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION855-680-9595NEED HELP?