Dafra DRPB48 Operation Manual
          | |
Contents | 
DRPB48 Operation ManualPneumatic Blind Rivet Setting Tool - DRPB48READ THIS MANUAL CAREFULLY BEFORE USING THE TOOL !It is IMPORTANT to follow the safety instructions for adequate protectionagainst injuries.- This tool should be used ONLY to set blind rivets within the TOOL’S CAPACITY. It MUSTNOT be used for other purposes, such as hammer, etc.- This tool should be always operated with compressed air supply within the air pressurerange 0.5Mpa ~ 0.7Mpa.- Always DISCONNECT the air supply from the tool before changing the tool parts, such asjaws, etc.- DO NOT use the tool in the environment described as below: fuel and combustion air. temperature rapidly rising. humidity, rain, water, storm and thunder, lightning.- When the tool is suspended by the operation hook during use, be sure the tool will not fall.- When using the tool, always carry protective goggles, protective gloves, safety helmet, andother necessary protections. It is highly recommended for safety reasons.- Only use genuine spare parts for maintenance and repairs.- All repair work must be carried out by skilled personnel, when in doubt, always return thetool to the distributor.TOOL CAPACITYBlind rivets 3.0/3.2mm ~ 4.0mm ~ 4.8/5.0mm standard – 2.4mm optional.TOOL SPECIFICATIONSAir supply pressure: 0.5Mpa ~ 0.7MpaOutput traction power: 8,400N ~ 11,760 NStroke: 16mmNet weight: 1.30kgs |
Related manuals for Dafra DRPB48
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine